Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

V-Tech VT-230/VT-133 Vital Nails Construction Adhesive Sealant Wood And Flooring Adhesive Sealant Strong Adhesion木头地板胶粘剂
No Rating Yet
0 Dijual
/ Per Produk

Penghantaran

Penghantaran Dari
Selangor
Anggaran Penghantaran
May 05, 2024 - May 12, 2024

Warna

Size

Sila pilih variasi produk terlebih dahulu

Kuantiti

819 Unit lagi
Jumlah
RM 13
Gambaran Kedai
erojak
less than a minute ago
Produk 157
Pengikut 1
Penilaian 4.9
Sertai Within a Year
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Home & Lifestyle  >  Hardwares & Components  >  Adhesive & Sealer
Brand
: Not Specified
Model
: Not Specified
SKU
: VT23030005
Dimension (Length x Width x Height)
: 15.00 x 15.00 x 15.00
Weight(kg)
: 0.675
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Selangor
Deskripsi Produk
V-Tech VT-230 Vital Nails Construction Adhesive Sealant 300ml Wood And Flooring Adhesive Sealant Strong Adhesion 木头和地板胶粘剂密封胶

A one-component, high performance, paste-like constuction adhensive sealant formulated to bond a variety of common construction materials. It has strong initial grab, superior adhesion and will not slump on vertical surfaces.

CURING SYSTEM Solvent evaporation
COLOR Brown
OPEN TIME Max. 5 minutes
CURING TIME 24 – 72 hours
APPLICATION TEMPERATURE -20 °C – 38 °C
SERVICE TEMPERATURE -30 °C – 60 °C
SHELF LIFE 12 months

Application:

Ideal for bonding of skirting boards of wood and PVC, particleboard, masonry, aluminium, galvanized iron, steel, concrete, fibrous cement sheeting, wall brick, concrete and flooring paneling. It is also safe to use on foamed polystyrene and mirror backed tiles.

Directions:

1. Surfaces must be clean, dry and free of dirt, grease, oil or water.

2. For a neat finish, apply masking tape and remove it before construction adhesive skins over.

3. Cut tip off and puncture the internal foil seal with nozzle. Cut nozzle at 45° angle to desired bead-width and apply to substrate with cartridge gun.

4. Two-way contact (Lighter substrate bonding): Apply adhesive onto substrate to be bonded, press firmly, and pull apart. Allow to tack-off for 10 to 30 seconds and press firmly together again. Contact areas should be tapped with a rubber mallet to ensure intimate contact.

5. One-way method (Heavier substrate bonding): Apply adhesive onto substrate to be bonded, press firmly, and securely fasten them together (clamp, nail, screw, etc.). Retain fastening for a minimum of 24 hours.

6. Any wet or partially wet adhesive can be removed with a piece of cloth. Dried adhesive is best removed with scraper or by sanding.

一种单组份、高性能、糊状建筑密封胶，用于粘合各种常见的建筑材料。初抓力强，附着力强，在垂直表面上不会塌陷。

固化系统溶剂蒸发
颜色 棕色
开放时间最长。 5分钟
固化时间 24 – 72 小时
应用温度 -20 °C – 38 °C
工作温度 -30 °C – 60 °C
保质期 12 个月

应用：

非常适合粘合木材和 PVC 踢脚板、刨花板、砖石、铝、镀锌铁、钢、混凝土、纤维水泥板、墙砖、混凝土和地板镶板。在泡沫聚苯乙烯和镜面瓷砖上使用也是安全的。

方向：

1. 表面必须清洁、干燥且无污垢、油脂、油或水。

2. 为获得整洁的饰面，请在施工粘合剂表皮覆盖之前使用遮蔽胶带并将其撕掉。

3. 切断尖端并用喷嘴刺破内部箔密封。以 45° 角将喷嘴切割到所需的珠子宽度，然后用筒式喷枪涂抹到基材上。

4.双向接触（较轻的基材粘合）：将粘合剂涂在要粘合的基材上，用力按压，然后拉开。让缝线 10 到 30 秒，然后再次牢固地压在一起。接触区域应该用橡皮槌敲击以确保亲密接触。

5. 单向法（较重的基材粘合）：将粘合剂涂在要粘合的基材上，压紧，并牢固地固定在一起（夹子、钉子、螺丝等）。保持紧固至少 24 小时。

6. 任何湿的或部分湿的粘合剂都可以用一块布去除。干胶最好用刮刀或打磨去除。
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.