Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

5KG NIPPON FLEX 200 - WHITE (ACRYLIC WATERPROOFING)
No Rating Yet
0 Dijual
/ Per Produk

Penghantaran

Penghantaran Dari
Selangor
Anggaran Penghantaran
May 05, 2024 - May 12, 2024

Warna

Sila pilih variasi produk terlebih dahulu

Kuantiti

49 Unit lagi
Jumlah
RM 80
Gambaran Kedai
Mr Paint Shop
2 days ago
Produk 424
Pengikut 3
Penilaian 0
Sertai Within a Year
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Home & Lifestyle  >  Hardwares & Components  >  Paints & Accessories
Brand
: Not Specified
Model
: Not Specified
SKU
:
Dimension (Length x Width x Height)
: 20.00 x 20.00 x 18.00
Weight(kg)
: 5.84
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Selangor
Deskripsi Produk
• Single component--no mixing required
• Easily applied--can be applied by non-skilled labour
• Flexible--capable of bridging stationary cracks
• Barrier against salts and atmospheric gases
• High build--masking imperfections in substrates
• Waterproof-versatile and multi-purpose
• U.V stable--long service life and maintains its appearance

Nippon FLEX 200 is a single component, elastomeric, breathable, acrylic copolymer liquid apply waterproofing coating. It resists ageing from heat, UV, sunlight, rain, wind or frost and ozone. Able to resists water yet allows water vapour to escape through it and thus, preventing blistering issue. A basic waterproofing coating for old and new construction.

Uses:
Nippon FLEX 200 is a basic waterproofing coating for old and new construction. It is
suitable for above ground, interior and exterior waterproofing applications such as:
• RC roof, car porch roof, open roof terrace
• Balconies, A/C ledge, Overhangs, and etc
• Walls and RC fencing
• Asbestos
• Timber
• Asphalt/Bitumen

Product Type : Liquid Apply Waterproofing
Product Grade : Nippon FLEX 200
Packsize : 20kg/pail, 5kg/pail
Finishing : low sheen
Color : White, Grey, Green, etc
Substrate : Concrete

Application Data
Application temperature : 0°C to 45°C
Service temperature : -5°C to 80°C
Theoretical coverage : 0.25-0.35kg/m2 /coat (note: the actual coverage depends on the type of substrate,
substrate surface porosity, substrate texture, and whether a primer is used)
Special Notes : Limits to heavy traffic and heavy traffic

Application Method
Substrate Preparation
Concrete and Masonry Substrate : The substrate must be thoroughly clean and dry, free from dust, algae, mildew, fungal, grease and oil. All the contaminants, previous waterproofing and impurity must be removed till bare substrate. Any cracks, honey combs, water leakage area should be repaired by Nippon Repair System (for more detail, please refer to Nippon Technical Department) before the waterproofing work proceed. The substrate must be sound. The concrete surface should be flat and free from holes and undulations. Any holes and undulations should be resurfacing with Nippon Scratch Coat System. The surface should be clean smooth and have a slope of at least 1-2% to allow water run-off.

Mixing
Stir the product thoroughly using mechanical mixer at a slow speed drill at 300-400 rpm fitted with suitable paddle for 1-2minutes. Do not add any additional water or solvent to the product.

Cleaning
Clean up equipment or tools with Water immediately after use. Cured material can be removed mechanically.
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.