Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

Nippon Paint - EA4 Finish Epoxy with hardener 1L x 2set + Tile Primer with hardener (Package)
No Rating Yet
0 Dijual
/ Per Produk

Penghantaran

Penghantaran Dari
Negeri Sembilan
Anggaran Penghantaran
Nov 21, 2024 - Nov 28, 2024

Warna

Colors Option

Sila pilih variasi produk terlebih dahulu

Kuantiti

49 Unit lagi
Jumlah
RM 305
Gambaran Kedai
Shong Heng Home Malaysia
8 days ago
Produk 2480
Pengikut 7
Penilaian 4.9
Sertai 2 Years Ago
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Home & Lifestyle  >  Hardwares & Components  >  Paints & Accessories
Brand
: Not Specified
Model
: Not Specified
SKU
: BS 9093 Ash Grey
Dimension (Length x Width x Height)
: 10.00 x 10.00 x 10.00
Weight(kg)
: 4.5
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Negeri Sembilan
Deskripsi Produk
⛔️Colours representations on website may vary from actual paint colours. Visit your nearest Nippon Paint Colour Creations outlet(s) to get a physical colour card to confirm your colour choices.
✅Please remark your colour code & colour name upon place order at through chat or order message
✅Do not hesitate to contact us for any requirement or any question. Thank you


🦍1L NIPPON PAINT EA4 Finish Epoxy with Hardener (2 set) + Tile Primer 2.5L with Hardener

NIPPON EA4 FINISH is a two-pack amine-adduct cured epoxy finish for use on steel and cement surfaces where chemical, oil and abrasion resistant coating is required. It is recommended for non-immersion services. If it is to be applied over steel, it has to be used in combination with the appropriate primers as recommended below. If it is to be applied over concrete the surface should be acid-treated prior to application. NIPPON EA4 FINISH is also available in non-skid quality.

✔️PRODUCT FEATURES
- Good resistance to abrasion and mechanical damage
- Excellent on correctly prepared and primed surfaces
- Dry service temperature up to 100ºC

✔️SPECIFICATIONS
Paint Type: Solvent based
Product Type: Interior
Finishing: High Gloss (Variety of colours)
Recommended Substrate: Properly primed steel, masonry and tile

✔️TECHNICAL DATA
Drying Time (25-30°C):
#️⃣Touch Dry: 2 - 3 hours (Dependent on temperature and humidity)
#️⃣Hard Dry: 16 hours (Dependent on temperature and humidity)
- Overcoating Time (25-30°C): Minimum 16 hours (Dependent on temperature and humidity)
- Curing Time (25-30°C): 7 days (Dependent on temperature and humidity).
- Typical Thickness: 50 - 80 µm dry film per coat
100 - 160 µm wet film per coat
- No. of Coats: 1 - 3 coats

✔️COVERAGE
- Theoretical Coverage: 10.2 m² per litre per coat (for dry film thickness of 50 microns)
: 6.4 m² per litre per coat (for dry film thickness of 80 microns)
- Practical Coverage (40% Loss Factor, as a guideline): 6.1 m²/litre (for dry film thickness of 50 microns)
: 3.8 m²/litre (for dry film thickness of 80 microns)

✔️MIXING RATIO:
- 4 parts by volume of Base to 1 part by volume of Hardener.

✔️RECOMMENDED COATING SYSTEM
💡Concrete/Cement Floor
- Primer: Nippon Penetrative Epoxy Primer/ Nippon EA-4 Finish (100% dilution)/ Nippon EA9 Finish (100% dilution) (1 Coat)
- Top Coat: Nippon EA4 Finish (2 Coats)

💡Steel
- Primer: Nippon EA9 Red Oxide Primer (1 Coat)
- Top Coat: Nippon EA4 Finish (2 Coats)

💡Tiles/Ceramic Surfaces
- Primer: : Nippon Tiles Primer/ Nippon EA9 HB (1 Coat)
- Top Coat: Nippon EA4 Finish (2 Coats)
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.