Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

Selleys High-Temp RTV Silicone 85g (Gray) - Motor Gasket Gearbox Maker Oil Pump
No Rating Yet
0 Dijual
/ Per Produk

Penghantaran

Penghantaran Dari
Selangor
Anggaran Penghantaran
May 20, 2024 - May 27, 2024

Warna

Sila pilih variasi produk terlebih dahulu

Kuantiti

97 Unit lagi
Jumlah
RM 21
Gambaran Kedai
erojak
2 minutes ago
Produk 160
Pengikut 1
Penilaian 4.9
Sertai Within a Year
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Home & Lifestyle  >  Hardwares & Components  >  Adhesive & Sealer
Brand
: Not Specified
Model
: Not Specified
SKU
: TRSSL045
Dimension (Length x Width x Height)
: 10.00 x 3.00 x 15.00
Weight(kg)
: 0.09
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Selangor
Deskripsi Produk
Selleys Acrylic Wall Sealer Seals, conditions, and unifies surfaces, to provide a suitable foundation upon which the topcoats can be applied. It is formulated with 100% acrylic polymer, premium-grade titanium dioxide pigments, and special mineral fillers and additives, to ensure adhesion and performance of subsequent topcoats.

Ideal For :

- Crankshaft gasket, Oil pumps, Gearboxes, and pumps, Water pumps

Features :

- Forms gaskets instantly from the tube – any size, any shape.

- Instants gasket cures to a tough Silicone.

- Rubber which outperforms and replaces conventional paper, cork, or rubber gaskets.

- Instant gasket flows into every space or unevenness between surfaces perfectly for a tough and high-pressure seal.

- Resist high temperatures.

- Resist aging, water, oil, grease, and vibration.

How to use?

- Remove old gasket material from mating surfaces and clean with turpentine or petrol. If adhesion of the gasketing is not required, wipe mating surfaces with an oily cloth.

- Pierce blind seal in a tube, fit nozzle, and cut to the required size; eg. 3mm for stamped parts and 1.5mm for cast parts.

- Squeeze a bead of sealant onto one of the surfaces to be joined, around the perimeter of the part, and around bolt holes.

- Join the parts together within 10 minutes and bolt down to the desired torque. If the thicker gasket is required, assemble but do not tighten bolts for 24 hours. Material cures in 48 hours. (when disassembly is required, pry the two flanges apart and remove the old sealant before reassembly.).

- After use removes the nozzle and replaces the cap. Allow the sealant to cure in the nozzle and remove it before the next use.

Handy Tips :

Not recommended where temperatures exceed 343˚C/650˚F (such as exhaust manifolds) or for contact with gasoline or distillate. When eliminating cork gaskets, ensure that adequate clearance remains for mechanical parts, eg. valve rocker covers (in these cases do not fully tighten until the sealant has cured).

Safety Tips:

On contact, an uncured sealant can irritate skin and eyes. If in eyes, wash out immediately with water. The product releases acetic acid while curing. Keep out of reach of children.

Selleys Acrylic Wall Sealer 密封、调节和统一表面，以提供可施加面漆的合适基础。它由 100% 丙烯酸聚合物、优质二氧化钛颜料以及特殊的矿物填料和添加剂配制而成，以确保后续面漆的附着力和性能。

理想的：

- 曲轴垫片、油泵、齿轮箱和泵、水泵

特征：

- 立即从管中形成垫圈 - 任何尺寸，任何形状。

- 瞬间垫片固化成坚韧的硅胶。

- 性能优于并替代传统纸、软木或橡胶垫圈的橡胶。

- 即时垫片完美地流入每个空间或表面之间的不平整，以实现坚韧和高压的密封。

- 抵抗高温。

- 抗老化、水、油、油脂和振动。

如何使用？

- 从配合表面去除旧的垫圈材料并用松节油或汽油清洁。如果不需要密封垫圈，请用油布擦拭配合表面。

- 在管子中刺穿盲封，安装喷嘴，并切割成所需的尺寸；例如。冲压件为 3 毫米，铸造件为 1.5 毫米。

- 将一滴密封胶挤到要连接的一个表面上，在零件周边和螺栓孔周围。

- 在 10 分钟内将零件连接在一起，并用螺栓固定到所需的扭矩。如果需要更厚的垫圈，组装但不要在 24 小时内拧紧螺栓。材料在 48 小时内固化。 （当需要拆卸时，将两个法兰撬开并在重新组装之前去除旧密封剂。）。

- 使用后取下喷嘴并更换盖子。让密封剂在喷嘴中固化，并在下次使用前将其清除。

小贴士：

不建议在温度超过 343˚C/650˚F（例如排气歧管）或与汽油或馏出物接触的情况下使用。取消软木垫片时，请确保为机械部件保留足够的间隙，例如。气门摇臂盖（在这些情况下，在密封剂固化之前不要完全拧紧）。

安全提示：

接触时，未固化的密封剂会刺激皮肤和眼睛。如果进入眼睛，请立即用水冲洗。该产品在固化时会释放乙酸。请将本品放在儿童不能接触的地方。
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.