Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

Selleys No More Big Gaps (750ML)
No Rating Yet
2 Dijual
/ Per Produk

Penghantaran

Penghantaran Dari
Selangor
Anggaran Penghantaran
May 23, 2024 - May 30, 2024

Warna

Sila pilih variasi produk terlebih dahulu

Kuantiti

18 Unit lagi
Jumlah
RM 28
Gambaran Kedai
Mr Paint Shop
10 hours ago
Produk 424
Pengikut 3
Penilaian 0
Sertai Within a Year
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Home & Lifestyle  >  Hardwares & Components  >  Paints & Accessories
Brand
: Not Specified
Model
: Not Specified
SKU
:
Dimension (Length x Width x Height)
: 7.00 x 7.00 x 34.00
Weight(kg)
: 1
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Selangor
Deskripsi Produk
Selleys No More Big Gaps is an expanding foam, which cures into a semi rigid closed cell foam,
making it ideal for filling large and irregular holes or cavities such as around pipes.

Features :
- Fast curing. Surface will be tack free within 15 minutes after application. A 3cm to 5cm deep application will be fully cured in approximately 4 hours.
- Expands up to 2.5 times to fill those irregular and large holes around the home. Expansion will vary depending on the conditions and confinement of the space.
- Excellent insulator, and also blocks pests, noise and birds.
- Convenient aerosol can, no mixing required simply spray into the gaps.
- Cured product can be cut, trimmed, sanded and painted.
- Suitable for interior and exterior use.
- Superior adhesion to a broad range of surfaces, resulting in a lasting finish.
- CFC-free ozone friendly hydrocarbon propellant.

Ideal For
Gaps between window and door frames and the wall, along skirting boards, around cornices, in corners or between walls and ceilings, concretes, tiles, fibre cement boards and woods.

What materials is this product suitable for?
- Timber
- Brick
- Concrete
- Plasterboard
- Particleboard
- Fibre cement sheeting
- Masonry
- Ceramic Tiles
- Glass
- Steel
- Aluminium

Most Plastics*
*Not for use on polyethylene, polypropylene, Teflon, silicone or polystyrene.

How To Use :
- Ensure the surface is clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk. For best performance, moisten surfaces by spraying with water (a plant sprayer is ideal).
- Wear gloves and eye protection. Product is difficult to remove from skin and clothing.
- Shake can vigorously for 60 seconds.
- Screw nozzle onto can valve. Do not over tighten.
- Turn can upside down and gently apply pressure on the trigger to extrude the product. Vary the pressure to control product flow. Fill half the space. Do not overfill as product will expand up to 2.5 times its volume over several hours.
- For extended usage continue to shake the can from time to time.
- Clean up any overspray and spillage immediately with a dry cloth. Acetone/nail polish remover will assist.
- Product will be tack free in 15 minutes and fully cured in approximately 4 hours. Once cured, product can be cut back with a sharp knife or sanded with a sanding block.

Limitations:
- Not suitable for use as a fire barrier.
- Not suitable for manufacture of floatation aids or life saving devices.
- Will not block rats and mice where access holes are in current use.
# Not for use on polyethylene, polypropylene, Teflon, silicone or polystyrene.
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.