Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

V-Tech VT-300 PVC Solvent Cement
No Rating Yet
0 Dijual
/ Per Produk

Penghantaran

Penghantaran Dari
Selangor
Anggaran Penghantaran
May 05, 2024 - May 12, 2024

Warna

Size

Sila pilih variasi produk terlebih dahulu

Kuantiti

997 Unit lagi
Jumlah
RM 10.6
Gambaran Kedai
erojak
less than a minute ago
Produk 157
Pengikut 1
Penilaian 4.9
Sertai Within a Year
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Home & Lifestyle  >  Hardwares & Components  >  Adhesive & Sealer
Brand
: Not Specified
Model
: Not Specified
SKU
: VT-3000500
Dimension (Length x Width x Height)
: 15.00 x 15.00 x 15.00
Weight(kg)
: 0.675
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Selangor
Deskripsi Produk
V-TECH VT-300 PVC SOLVENT CEMENT

A premium quality, clear color, medium strength adhesive formulated for PVC and uPVC fittings and pipes bonding applications. It is easy-to-use, fast setting and offers superior bonding strength.

PVC Solvent Cement is ideal for bonding PVC and uPVC fitting and pipes. The solvent breaks down the top layers of the PVC. The PVC resin then fills the gaps to cement the two PVC pieces together. It is fast setting, safe for drinking water and offers superior bonding strength.

- Superior Adhesion

- Fast Setting

- Waterproof Bonding

Physical state Clear liquid

Odor Aromatic

Color Clear

Application temperature -10°C – 40°C

Service temperature -10°C – 60°C

Shelf life 12 months

Applications :

Ideal for bonding and coupling of rigid PVC and PVC pipes up to 100mm diameter. Upon complete curing, it is safe for drinking water, irrigation, waste water, sanitary pipes and conduit etc.

Product Code Content Carton Quantity

VT-300100 100GM 60 / carton

VT-300500 500GM 24 / carton

Directions:

1. Surfaces must be clean, dry and free of dirt, grease, oil or water.

2. Roughen mating surfaces to the full depth of socket using medium glass paper or emery cloth.

3. Apply the solvent cement to both surfaces to be bonded with a dry, clean brush to give a uniform coating, with heavier coat at the pipe end.

4. It will dissolve and soften the surfaces of the pipes and fitting. Assemble while cement is wet.

5. When the pipes and fitting are assembled together, the softened surfaces mix and on hardening produce a chemically welded joint.

6. Hold firmly for 30 seconds to allow initial bonding, then remove surplus solvent cement and should not be disturbed for 15 minutes.

7. 12 hours for drying time should be allowed before working pressure, and 24 hours before testing to 1.5 working pressure.

一种优质、颜色清晰、中等强度的粘合剂，适用于 PVC 和 uPVC 管件和管道粘合应用。它易于使用、快速设置并提供卓越的粘合强度。

PVC 溶剂水泥是粘合 PVC 和 uPVC 管件和管道的理想选择。溶剂会分解 PVC 的顶层。然后 PVC 树脂填充间隙以将两个 PVC 片粘合在一起。它可以快速凝固，对饮用水安全，并提供卓越的粘合强度。

- 卓越的附着力

- 快速设置

- 防水粘合

物理状态 透明液体

气味 芳香

颜色清晰

应用温度 -10°C – 40°C

使用温度 -10°C – 60°C

保质期12个月

应用：

非常适合连接和连接直径达 100 毫米的硬质 PVC 和 PVC 管道。完全固化后，可安全用于饮用水、灌溉、废水、卫生管道和导管等。

产品代码 内容 纸箱数量

VT-300100 100GM 60/箱

VT-300500 500GM 24个/纸箱

方向：

1. 表面必须清洁、干燥且无污垢、油脂、油或水。

2. 使用中号玻璃纸或砂布将配合面粗糙到插口的全部深度。

3. 用干燥、清洁的刷子将溶剂型胶粘剂涂在要粘合的两个表面上，形成均匀的涂层，管端的涂层较厚。

4. 溶解和软化管道和管件的表面。在水泥湿润时组装。

5. 当管道和管件组装在一起时，软化的表面混合并在硬化时产生化学焊接接头。

6. 牢牢握住 30 秒以进行初始粘合，然后去除多余的溶剂粘合剂，15 分钟内不要乱动。

7、工作压力前应允许12小时干燥时间，测试至1.5工作压力前24小时。
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.