Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

Nippon Slate Finish Surface Protective Coating 1L
No Rating Yet
0 Dijual
/ Per Produk

Penghantaran

Penghantaran Dari
Negeri Sembilan
Anggaran Penghantaran
Nov 13, 2024 - Nov 20, 2024

Warna

Sila pilih variasi produk terlebih dahulu

Kuantiti

10 Unit lagi
Jumlah
RM 43
Gambaran Kedai
Shong Heng Home Malaysia
1 hours ago
Produk 2480
Pengikut 7
Penilaian 4.9
Sertai 2 Years Ago
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Home & Lifestyle  >  Hardwares & Components  >  Paints & Accessories
Brand
: Not Specified
Model
: Not Specified
SKU
:
Dimension (Length x Width x Height)
: 10.00 x 10.00 x 10.00
Weight(kg)
: 1
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Negeri Sembilan
Deskripsi Produk
Slate Finish Gloss is a solvent based acrylic coating. It is specially formulated surface protective coating with added UV additive for treatment of interior and exterior slates, natural stone, cementitious substrate etc against staining, efflorescence and scratching. This coating will enhance the colour of material giving the surface a fine lustrous finish.


Product Features:
• Protective coating against stain, efflorescence and scratching

Application Method
Brush / Roller Compressed air spray : Ready to use. Short-hair roller is preferable. : Dilute with maximum 5% of OP-1 Thinner.

Surface Preparation
New Surfaces
Surfaces to be painted must be cleaned thoroughly and dry. It must free from dirt, grease and other foreign matters. Allow all surfaces to dry completely prior to painting. Avoid painting when the moisture content and alkalinity of the walls are still high. (Recommended painting specification requires the moisture content of the substrate to be below 16% measured by Protimeter and alkalinity of the substrate to be below pH9). Do not apply on damp or wet surfaces and during raining. This will cause haze white appearance and adhesion problem on the substrate.

Previously Painted Surfaces
Clean the surface with approved detergent & thinner and leave to dry. Then remove all previous loose coatings with mechanical tools or hand tools. Ensure that the surface is completely dry and free from loose flaking material, dust or contamination prior coating.
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.