Double pressure gauge
1.List
GAUGE*1
5M WIRE*1
SCREW*2
BRACKET*1
1.6MPA PRESSURE SENSOR*2
MANUAL*1
2.Button Function Description
1.Short press button change PSI to BAR
2.Long pressing for reset. Condition: Connect the sensor in an atmospheric pressure environment Press and hold the button for more than 6 seconds, hear 2 beeps, and the reset is successful (note: it needs to be done while the sensor is connected)
3.Connection method
Connect the square connector to the instrument display terminal, and connect the two circular connectors to the sensors separately. After confirming that the connection is correct, connect the 12V/24V power supply.
4.Note
It is strictly prohibited to connect wires after being electrified, as it is very easy to burn out the instrument display circuit board! Damage caused by human factors is not covered by the warranty.
