XTUGA IEM1200 UHF Wireless In Ear Monitor System
This system comply with new FCC frequency rules.
Description:
1、UHF WIRELESS IN EAR MONITOR SYSTEM: UHF band Phase lock PLL, improved comprehensive performance, anti-frequency drop, anti-series frequency. Frequency range: A: 572 MHz-603 Mhz, B: 550-580Mhz. In the 32MHz frequency band, the preset 40 frequencies can be switched at will. The dynamic expansion circuit greatly improves the signal-to-noise ratio.
2、USED IN STAGE PERFORMANCE AND SOUND BROADCAST: Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch stereo monitoring has the headphone jack. Used in stage, it can replace traditional complex sound monitoring equipment, achieve admirable listening effect.
3、DESIGN FEATURES (APPERANCE AND DISPLAY): Elegant liquid crystal display panel and LCD display low-battery indicator on the receiver. With power and RF receiving indicator lamp. It using two AA batteries and efficient power circuit, long service time.
4、WIRELESS RANGE AND FREQUENCY RANGE: IEM1200 in ear monitor and receiver system offers tabletop stage monitoring with a wireless range of up to 300 feet. THE normal can be 250ft - 350ft. Also improve the signal-to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.
5、QUALITY AND TECHNOLOGY GUARANTEED: Using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong, because of the housing is made by tough metal material. It is the best choice of stage performance monitor product.
Specification:
Transmitter:
Case specification: standard 1U
Case material: metal panel
Oscillation mode: PLL synthesized
Frequency stability: ±0.005%
Frequency range: 550-580Mhz
Frequency interval: 32MHz
Preset Channel: 40 channels separately set 4 groups
Operate mode: manual adjust
Max Deviation: ±48KHz
Frequency response: 50Hz~15KHz±3dB
Transmit output power: 100mW (50Ω)
Harmonic radiation: <4NW
AF input: XLR, φ6.35mm jack
Earphone load impedance: ≥16Ω
Current consumption: DC 12V/250mA
Antenna socket: TNC socket(50Ω)
Receiver:
Oscillation mode: PLL Synthesized
Frequency range: 550-580Mhz
Preset channel: 40 channels separately set 4 groups
Operate mode: manual adjust
Receiving mode: single tuning
Sensitivity: deviation 25 khz, with connecting 7dBuV, S/N>78dB
Max Deviation: ±48KHz
Comprehensive T.H.D: >94db (1KHZ-A)
Comprehensive Response: 50Hz~15KHz±3dB
Output power: (32Ω) 2x35mw@1KHz
Earphone load impedance: ≥16Ω
Out socket: φ3.5mm stereo earphone socket
Volume output adjusts: adjust when using
Power box: batteries AA X 2
Current drain: 3V/120mA (Under the mediant degrees of the volume control)