Features:
Perfect for cooling your outdoor living areas.
Can be widely used in plant humidification, cooling, disinfection, dust reduction, landscaping, salt spray test and other artificial fog.
No air assistance is required, the system is simple, the spray point is fine, the atomization is sufficient, energy and water saving, low cost and fine effect.
Scope of application: Wetting and descaling, air humidification, chemical treatments, chemical spraying, liquid spraying, tobacco leaf humidification, tablet coating, flue gas evaporative cooling, sterilization, component cooling, fruit spray Wax, tile glazing, plant humidification, salt spray test, artificial fog, humidification in other places, etc.
Installation Steps:
1.Connect the adapter to the water tap.
2.Turn on the water tap to wash the system for 1 minute to purge the system and remove any impurities.
3.Using cable tie to fixed the pipe.
4.Turn on the tap slightly until jets are working, enjoy the cooling misting system.
5.Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time.
For 10m = 1 x 10m 4/7inch PE Hose ,1 x Faucet Connector ,1 x Garden Hose Quick Socket ,9 x Plastic Mister Nozzle (tee), 1 x Plastic Mister Nozzle (end)
Mist particles =70 microns, Flow rate: 6.7-7 L/Hour, Spray diameter: 0.8m, Hose Length: 10m
For 20m/ 66feet outdoor misting cooling system with 15 plastic mist nozzle sprinklers assorted kit.
Connect with 1/2" 3/4" male thread water faucet.