饾悥饾悋饾悩 饾悅饾悋饾悗饾悗饾悞饾悎饾悕饾悊 饾悎饾悊饾悡 饾悊饾悁饾悞 饾悜饾悇饾悊饾悢饾悑饾悁饾悡饾悗饾悜 饾悘饾悜饾悗饾悆饾悢饾悅饾悡 ?
馃憠 High quality gas regulator with safety features
馃憠 Manufactured according European standard
馃憠 All of our products are certified by SIRIM and JKPP Standards
馃憠 All IGT Products comes with 5 years warranty
馃憠 All the products comes with liability insurance up to 5 million USD
Actual lever indication only to be observed during gas consumption from the gas cylinder to gas the appliance.
馃煢饾悘饾惍饾惈饾惄饾惀饾悶: The bottle is empty, not more liquid gas.
馃煥饾悩饾悶饾惀饾惀饾惃饾惏: Early warning plan filling. Max, 1-2 hours use of gas.
馃煩饾悊饾惈饾悶饾悶饾惂: Normal pressure-Gas for more than 2 hours
饾悞饾悘饾悇饾悅饾悎饾悈饾悎饾悅饾悁饾悡饾悎饾悗饾悕
馃憠 MATERIAL : ZINC ALLOY
馃憠 WEIGHT : 0.2 KG
馃憠 PRESSURE RANGE : 0.3 - 7.5 BAR
馃憠 SET PRESSURE RATE : 20m BAR
馃憠 FLOW RATE 1.5KH/H
馃憠 INLET : 20MM
饾悥饾悋饾悁饾悡 饾悎饾悞 饾悇饾悧饾悅饾悇饾悞饾悞 饾悈饾悑饾悗饾悥 饾悤饾悁饾悑饾悤饾悇饾悞 (饾悇饾悈饾悤) ?
An excess flow valve is a mechanical safety device that may be installed on a natural gas service line and is designed to automatically shut off the flow of natural gas in the service line in the event of a significant break, puncture, or severance in the line.
EFV -100% cut off (most regulators in the market only cut off 90% even with EFV)
*100% fix to Gas Cylinder Malaysia馃憤馃憤馃憤
More Heavy duty &solid Body compare with old model(Adjustable position for gauge)
饾悞饾悁饾悈饾悇饾悡饾悩 饾悁饾悆饾悤饾悎饾悅饾悇
鉁?Always install the regulator in Gas stove OFF position only.
鉁?In normal condition of use, in order to ensure a safe operation of installation. It recommended that regulator should be changed every 10 years from the date of manufacturing.
鉁?For outdoor use, the device should be positioned or protected against direct penetration of trickling water.
鉁?Before installation make sure that rubber gasket in cylinder valve or regulator is in good condition.
鉁?Make sure all taps and appliances are turned off.
鉁?Use LPG cylinders in upright vertical position only.
鉁?Make sure flexible pvc gas tubing is in good condition & not more than 3 years old.
鉁?For rubber Tubing not more than 3 years old.
鉀?Do not try to remove the regulator in Gas switched ON position ever.
鉀?Do not move the cylinder during operation.
鉀?Do not change LPG cylinders in the presence of candle lights of flames.
鉀擠o only use any tools of installation, after hand tightening the nut.
饾悎饾悕饾悞饾悡饾悁饾悑饾悑饾悁饾悡饾悎饾悗饾悕 饾悞饾悡饾悇饾悘饾悞
1. Fill the regulator hose to the outlet nozzle. Use water and liquid soap for lubrication of the hose. Insert firmly and clamp it using the hose clamp.
2. In total absence of any flame remove the seal cap from the cylinder valve.
3. Press the push button horizontally, mount the regulator on the cylinder press the regulator firmly down, and release.
4. Turn on by turning the lever, after ensuring that regulator is connected firmly in n the cylinder.
5. To replace the cylinder turn OFF the lever dismount by horizontally pressing push button and pull
