Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

Turbosmart Carmo Boost Controller Turbo Smart Boost Control Car Turbo
No Rating Yet
0 Dijual

/ Per Produk

Penghantaran

Penghantaran Dari
Mainland China
Anggaran Penghantaran
Oct 10, 2024 - Oct 31, 2024

Warna

model

Sila pilih variasi produk terlebih dahulu

Kuantiti

37 Unit lagi
Jumlah
RM 79.4
Gambaran Kedai
Home Life Hall
20 hours ago
Produk 87315
Pengikut 6
Penilaian 4
Sertai 2 Months Ago
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Automotive & Motorbike  >  Auto Parts & Spares  >  Fuel System
Brand
: NoBrand
Model
: Not Specified
SKU
: 11794958250
Dimension (Length x Width x Height)
: 10.00 x 15.00 x 20.00
Weight(kg)
: 0.6
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Mainland China
Deskripsi Produk

Turbosmart Car Turbo Turbine Governing Valve Manual Boost Controller

How to Install A Manual Boost Controller?

Installing a manual boost controller will all depend on the type and configuration of your turbo system.Below are the three most common ways of installing a TurbosmartManual (Gated) Boost Controller.

Internal Wastegate Setup

  1. Allow the engine to cool down before installing your boost controller.
  2. Locate the pressure source port and thewastegate actuatorport on the turbocharger assembly.
  3. Remove the factoryboost control solenoidif fitted from the boost pressure supply port while leaving the solenoid connected to the ECU.
  4. Install your boost controller in the wastegate pressure line with the wastegate arrow pointing towards the wastegate actuator.
  5. If your wastegate actuator has additional ports, these will need to be blocked.
  6. Secure allsilicone hoseends withhose clamps.
  7. Mount your boost controller bracket onto the vehicle, then attach the boost controller onto the bracket with the supplied screws.
  8. Make sure the boost dial is turned completely anti-clockwise before making adjustments.

External Wastegate Setup

  1. Allow the engine to cool down before installing your boost controller.
  2. Locate the bottom port on theand the pressure source port.
  3. Install the Boost Tee in the wastegate pressure line with the wastegate arrow pointing towards the bottom port on the wastegate.
  4. Secure all silicone hose ends with hose clamps.
  5. Mount your boost controller bracket onto the vehicle, then attach the boost controller onto the bracket with the supplied screws.
  6. Make sure the boost dial is turned completely anti-clockwise before making adjustments.

Parallel Twin-turbo Setup

  1. Allow the engine to cool down before installing your boost controller.
  2. Locate the wastegate actuator ports on both turbochargers and a pressure source port.
  3. Remove the factory boost control solenoid if fitted from the boost pressure supply line.
  4. Install your boost controller in the wastegate pressure line with the wastegate arrow pointing towards the wastegate actuators.
  5. Be sure to keep the hoses joining the wastegate actuators at equal lengths.
  6. Secure all silicone hose ends with hose clamps.
  7. Mount your boost controller bracket onto the vehicle, then attach the boost controller onto the bracket with the supplied screws.
  8. Make sure the boost dial is turned completely anti-clockwise before making adjustments.

Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.