Features:
l High quality for professional use
l A wonderful replacement for broken or old one, ensures long lifetime and better work performance
l There are 2 air inlets/outlets atthe negative electrode of the fuel cell,the upper is air inlet and the lower is air outlet
l The anode is connected to hydrogen, and the cathode is connected to the air in the atmosphere
l No short-circuit operation, no external voltage across the fuel cell voltage
l Long-time operation, the positive and negative electrodes will produce liquid water, you can use an air compressor or syringe to remove it with pressure
Specification:
l Electrode Material: Monolithic MEA
l Size: 56.8x30x46.5mm
l Weight: about 63 g
l Power Generation Area: 25mm*25mm
l Voltage Range: 0V--0.95V
l Current: 1.0A@0.6V (25°C)
l Anode Fuel: 99.99% Hydrogen
l Cathode Fuel: Air In The Atmosphere
Package Includes:
l 1xPower Generation Module
Fuel Cell Power Generation Module High-Quality Self-Breathing Fuel Cell Module
Features:
l High quality for professional use
l A wonderful replacement for broken or old one, ensures long lifetime and better work performance
l There are 2 air inlets/outlets atthe negative electrode of the fuel cell,the upper is air inlet and the lower is air outlet
l The anode is connected to hydrogen, and the cathode is connected to the air in the atmosphere
l No short-circuit operation, no external voltage across the fuel cell voltage
l Long-time operation, the positive and negative electrodes will produce liquid water, you can use an air compressor or syringe to remove it with pressure
Specification:
l Electrode Material: Monolithic MEA
l Size: 56.8x30x46.5mm
l Weight: about 63 g
l Power Generation Area: 25mm*25mm
l Voltage Range: 0V--0.95V
l Current: 1.0A@0.6V (25°C)
l Anode Fuel: 99.99% Hydrogen
l Cathode Fuel: Air In The Atmosphere
Package Includes:
l 1xPower Generation ModuleOperation steps of electrolysis1 Add purified water into the water tank, and the water will enter the positive pole of the electrolysis module from the water tank. 2 Connect the power supply and start electrolysis. The best voltage range is 1.8V-2.3VPrecautions2: Use purified water or deionized water (you can use Ipoh purified water, which is available in supermarkets)(2) The positive and negative electrodes of the battery shall not be connected reversely3: The applied voltage shall not exceed 2.3V4: The maximum electrolytic water temperature is not higher than 70 ℃5: The water level of the water tank shall be higher than that of the electrolysis module.@Dry burning without water is strictly prohibited, or it will burn out.Maintenance and warranty6: Please keep the electrolyte membrane wet when not in use.2. Regularly replace the water in the water tank (replace it every 3 days or every 100 hours)
