Tan Chong-Liqui Moly Engine Flush is a highly effective cleaning fluid that clears troublesome deposits in the engine. The carrier fluid in our Engine Flush helps to dissolves sludge and contaminants quickly and reliably. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits & contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. Wear in the engine is thus reduced and the service life is extended.
******Engine Flush ,Oil Treatment and Valve Cleaner Buy 5 Bottle Free Extra 1 Bottle******
- Made in Germany
- Produced exclusively by Liqui Moly for Tan Chong Motor
- For cleaning and flushing out the oil circuits of gasoline or diesel engines. Not suitable for use on motorbikes with wet clutches.
- 300ml is sufficient for up to 6L of motor oil.
- Reduce engine wear.
- Extend engine service life.
- Help develops engine full performance characteristics.
For better performance, it is best to use with:
* Petrol Set
- TC-Liqui Moly Engine Flush (300ml)
- TC-Liqui Moly MoS2 Engine Treatment (300ml)
- TC-Liqui Moly Valve Clean (150ml)
- TC-Liqui Moly Fuel System Injection Cleaner (300ml)
*Diesel Set
- TC-Liqui Moly Diesel Injector Cleaner (250ml)
- TC-Liqui Moly Engine Flush (300ml)
- TC-Liqui Moly MoS2 Engine Treatment (300ml)
Engine Flush Application:
Add to warm engine before changing oil.
Allow to idle for 10 minutes.
Then switch off engine and change oil and filter.
Engine oil treatment description :
Run engine for about 10 minutes before use. Then turn engine off. Open the Oil Filler Cap in the Engine Compartment, empty the whole bottle at once. When pouring the Engine Oil Treatment, please take care to avoid dust contamination. After pouring in Engine Oil Treatment, close the oil filler cap and run the engine for about 10 minutes. Check the oil level thereafter.
Valve Clean Application:
Add directly into the fuel tank.
Injector Cleaner Description:
-Mix with Petrol Fuel when you Refueling Your Car
Step 1: Fuel in the Engine Cleaner first
Step 2: Pump in Petrol Fuel
Diesel Injector Cleaner Description:
-Mix with Diesel Fuel when you Refueling Your Car
Step 1: Fuel in the Diesel Cleaner first
Step 2: Pump in Diesel Fuel