Attention : Shake gas regulator
1. Before use
2. Or after the ball stuck because of leak detected
��� �� ���� ������� ����� ���:
- Safe to use with Safety Valve
- Reduces the risk of natural gas fire, explosion, personal injury and/or property damage With Anti Leak design
- 1.5 meter fire resistance hose
- Come with Pressure Gauge Indicator
- Convenience for reading of gas cylinder and operating pressure with Pressure Gauge Indicator
- Allows stable pressure and performance
- 100% fit to Gas Cylinder Malaysia
- Suitable for home, restaurant, business, canteen and etc.
������� ��������:
- Excess Flow safety
- With EFV system- excess flow valve/leak & level indicator
- Maximum Inlet Pressure 6 bar
- Anti Leak design
- Gas Leakage Inspection :Shows Gas Leakage on Hose or Gas Cooker
- L.P.G Low pressure Gas Only
- Emergency Gas Leak Cut Off (Safety Valve)
- Fire Resistance High Performance Hose
- Stable pressure and performance
- Satisfaction Guaranteed
������� ��������������:
- Inlet Pressure: max 0.6Kpa (Max 6 bar)
- Outlet pressure: 2.8kpa (28 mbar)
- Flow Rate: 1kg/hour
- Accessories: 1.5 hose ( Fire Resistant) & 2 x clamping ring
- Usage: For Normal Household Use Only (Low Pressure)
- Comes with Pressure Gauge – Shows Balance of Gas in the Gas Cylinder
- READY STOCK
- FAST DELIVERY
- SIRIM SAFETY APPROVED
- RM1000000 PRODUCT LIABILITY FOR 5 YEARS WARRANTY
������ ������:
- Always install the regulator in Gas stove OFF position only.
- In normal condition of use, in order to ensure a safe operation of installation. Its recommended that regulator should be changed every 10 years from the date of manufacturing.
- For outdoor use, the device should be positioned or protected against direct penetration of trickling of water.
- Before installation make sure that rubber gasket in cylinder valve or regulator is in good condition.
- Make sure all taps and appliances are turned off.
- Use LPG cylinders in upright vertical position only.
- Make sure flexible pvc gas tubing is in good condition & not more than 3 years old.
- For rubber Tubing not more than 3 years old.
- Do not move the cylinder during operation.
���������� ��� ���������
- Ensure that the switch is pointing downward. Place the regulator on the cylinder value
- Turn the switch clockwise so that it points to the left (the "OFF" position)
������� ��� ��� "��" ��� "���"
- Operates the switch clockwise so that it points upward. The cylinder value is now open and gas is "ON"
- To turn the gas "OFF", turn the switch anticlockwise until it points to the left
