���� �� ��� ?Integrated Gas Technologies Ltd. is a Denmark-based manufacturer of gas control equipment's. The IGT products are REPRESENTED EXCLUSIVELY in Malaysia by IGT (M) SDN BHD.
��� �������� ��� ��� ��������� ������� ?
� High quality gas regulator with safety features
� Manufactured according European standard
� All of our products are certified by SIRIM and JKPP Standards
� All IGT Products comes with 5 years warranty
� All the products comes with liability insurance up to 5 million USD
�������������
� MATERIAL : ZINC ALLOY
� WEIGHT : 0.2 KG
� PRESSURE RANGE : 0.3 - 7.5 BAR
� SET PRESSURE RATE : 20m BAR
� FLOW RATE 1.5KH/H
� INLET : 20MM
���� �� ������ ���� ������ (���) ?
An excess flow valve is a mechanical safety device that may be installed on a natural gas service line and is designed to automatically shut off the flow of natural gas in the service line in the event of a significant break, puncture, or severance in the line.
EFV -100% cut off (most regulators in the market only cut off 90% even with EFV)
*100% fix to Gas Cylinder Malaysia���
More Heavy duty &solid Body compare with old model(Adjustable position for gauge)
������ ������
✅ Always install the regulator in Gas stove OFF position only.
✅ In normal condition of use, in order to ensure a safe operation of installation. It recommended that regulator should be changed every 10 years from the date of manufacturing.
✅ For outdoor use, the device should be positioned or protected against direct penetration of trickling water.
✅ Before installation make sure that rubber gasket in cylinder valve or regulator is in good condition.
✅ Make sure all taps and appliances are turned off.
✅ Use LPG cylinders in upright vertical position only.
✅ Make sure flexible pvc gas tubing is in good condition & not more than 3 years old.
✅ For rubber Tubing not more than 3 years old.
⛔ Do not try to remove the regulator in Gas switched ON position ever.
⛔ Do not move the cylinder during operation.
⛔ Do not change LPG cylinders in the presence of candle lights of flames.
⛔Do only use any tools of installation, after hand tightening the nut.
������������ �����
1. Fill the regulator hose to the outlet nozzle. Use water and liquid soap for lubrication of the hose. Insert firmly and clamp it using the hose clamp.
2. In total absence of any flame remove the seal cap from the cylinder valve.
3. Press the push button horizontally, mount the regulator on the cylinder press the regulator firmly down, and release.
4. Turn on by turning the lever, after ensuring that regulator is connected firmly in n the cylinder.
5. To replace the cylinder turn OFF the lever dismount by horizontally pressing push button and pull
