8100 X-CLEAN 5W40 SN C3 100% SYNTHETIC
8100 X-CLEAN EFE 5W30 SN C2 C3 100% SYNTHETIC
8100 X-CLEAN 5W40 SN C3 100% SYNTHETIC
High performance 100% Synthetic lubricant approved by many car manufacturers.
Specially designed for last generation cars, powered by Gasoline or Diesel engines, naturally aspirated or turbocharged, indirect or direct injection, Euro 4, 5 or 6 emission regulation compliant, requiring an ACEA C3 engine oil i.e. high HTHS (> 3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of Sulfated Ash (≤ 0.8%), Phosphorus (0.07 ≤ x ≤ 0.09%) and Sulfur (≤ 0.3%).
Compatible with catalytic converters and Diesel Particulate Filters (DPF).
Before use always refer to the owner manual or handbook of the vehicle.
ACEA STANDARDSACEA C3
API STANDARDSAPI SERVICE SN
OEM APPROVALS
MERCEDES-BENZ MB-APPROVAL 229.51, RENAULT RN0710 - RN0700
OEM PERFORMANCES
BMW LL-04, CHRYSLER MS 12991, FIAT 9.55535-S2, FIAT 9.55535-T2, FIAT 9.55535-GH2, FORD WSS-M2C917-A, GENERAL MOTORS GM DEXOS2™, VW 505 00 505 01
OEM RECOMMENDATIONSKIA, HYUNDAI, HONDA, MITSUBISHI, NISSAN, SUZUKI, SSANGYONG
8100 X-CLEAN EFE 5W30 SN C2 C3 100% SYNTHETIC
Synthetic technology lubricant that provides at the same time High Protection and Fuel Economy. Approved by BMW Group, GM (General Motors) Opel, and Mercedes for its Extra Fuel Economy property. Specially designed for the latest generation cars, powered by Gasoline and Diesel engines, naturally aspirated or turbocharged, direct or indirect injection. For vehicles that are Euro 4, 5 or 6 emission regulation compliant and require an ACEA C3 engine oil i.e. high HTHS (> 3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of Sulfated Ash (≤ 0.8%), Phosphorus (0.07 ≤ x ≤ 0.09%) and Sulfur (≤ 0.3%), or an ACEA C2 engine oil i.e. a low friction, low HTHS (≥ 2.9 mPa.s) viscosity and "Mid SAPS" oil with reduced content of Sulfated Ash (≤ 0.8%), Phosphorus (≤ 0.09%) and Sulfur (≤ 0.3%). Suitable when a "Fuel Economy" lubricant is required: ACEA C2 standard. Compatible with catalytic converters (CAT) and Diesel Particulate Filters (DPF). May be unsuitable for use in some engines. Always refer to the owner’s manual if in doubt.
ACEA STANDARDSACEA C2, C3
API STANDARDSAPI SERVICE SN
OEM APPROVALS
OPEL VAUXHALL OV 040 1547 - G30, OPEL VAUXHALL OV 040 1547 - D30, BMW LL-04, MERCEDES-BENZ MB-APPROVAL 229.52
OEM PERFORMANCESFIAT 9.55535-S1, FIAT 9.55535-S3, VW 505 00 505 01
OEM RECOMMENDATIONS
HONDA, HYUNDAI, KIA, MITSUBISHI, NISSAN, SUBARU, SUZUKI, SSANGYONG, TOYOTA
