Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

Electric Pumping Unit Oil Change Pumping Unit Tool Pump 12V Honey Suction Honey Pumping Machine Car Oil Pumping Machine
No Rating Yet
0 Dijual

/ Per Produk

Penghantaran

Penghantaran Dari
Mainland China
Anggaran Penghantaran
Sep 30, 2024 - Oct 21, 2024

Warna

Color classification

Sila pilih variasi produk terlebih dahulu

Kuantiti

138 Unit lagi
Jumlah
RM 99.9
Gambaran Kedai
Home Life Hall
2 hours ago
Produk 87315
Pengikut 5
Penilaian 3
Sertai Within a Month
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Automotive & Motorbike  >  Auto Oils & Fluids  >  Engine Oil
Brand
: NoBrand
Model
: Not Specified
SKU
: 12709015215
Dimension (Length x Width x Height)
: 10.00 x 15.00 x 20.00
Weight(kg)
: 0.6
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Mainland China
Deskripsi Produk

Product Name: oil pump oil changing artifact 12v honey suction honey pumping machine electric pumping unit oil changing device car DIY oil changing device
tips: the crude oil pipe (6mm) is preferred to be used with higher efficiency. If the oil dipstick Jack is straight, it is recommended to choose 5mm copper tube set, and the copper tube straight plug is convenient to operate.
Note: the oil pumping efficiency of this tool set is still relatively high. Not only is the oil pumping and oil changing available, but also a small amount of oil pumping is no problem. If you need it, you can rest assured to place an order!!!
Operating Instructions for oil pumping tool set:
1. Tool assembly:
electric vacuum pump & rarr; Vacuum lock storage tube & rarr; Oil storage bottle & rarr;PU transparent connecting pipe & rarr; Hard oil pump
when using the tool, complete the assembly in the order above. The connection tight and tight, the virtual plug will leak air and affect the pumping efficiency. Force when inserting, press the blue snap ring when dismantling, and then pull out.
2. Preparations:
start the hot car for about 10 minutes, then turn off and cool down: 5 minutes in winter and 10 minutes in summer, start pumping oil. The best oil temperature is 40-50 degrees, which can be taken in about 10 minutes.
Note: do not pump oil from cold cars, the oil is too thick and the efficiency is very low; Do not pump oil when the car is stopped, prevent the tool from being damaged due to excessive oil temperature, and the oil temperature of normal cars is below 90 degrees, however, when the cooling system of individual vehicles fails, the oil temperature will exceed 100 degrees. Note when you start pumping: when the connecting pipe becomes obviously soft or the connecting pipe feels hot, stop pumping oil. After the oil temperature drops, continue pumping oil to avoid damage to the oil pump due to excessive oil temperature.
3. Operation method:
after the oil pump is straightened (it can be straightened by reverse disc circle), insert it into the depth such as the oil dipstick, fix the oil pump by hand, start the oil pump, after the standby oil level drops, the oil can't be absorbed, and then insert about 1cm to continue pumping. Repeat the above operation and follow the oil level to suck down. Finally, when the oil can't be absorbed, the oil pumping pipe has reached the bottom, at this time, the engine oil has been basically exhausted. After about 10 minutes, pull the oil pump up and down to suck it and then clean it (a little oil left on the inner wall of the engine flows back).
4. Disposal of waste oil:
Please put the waste oil in a bottle and throw it to the designated place according to the garbage classification standard. You must not discard it at will to avoid environmental pollution-remember!!!
If you encounter other problems, please contact Taobao online customer service.
Notice to buyers:
oil pump is strictly prohibited to extract corrosive oil such as brake oil and gasoline to avoid damaging the oil pump. After pumping oil, please pump detergent water or soap water to flush the oil pump in time so as not to affect the performance of the oil pump-remember!!!
Do not place the oil storage bottle upside down or partial when using the tool. Do not absorb too much oil to avoid damage caused by the vacuum pump sucking in oil.-- Remember
thank you for your support to [Risheng car products]!!!
FAQ:
1. Is the oil pumping clean or the chassis oil draining clean?
The answer is: smoking is cleaner than putting. Intuitively, it seems that the oil from the chassis should be cleaner for everyone, but most of the repair factory masters want to save time, generally, the screw is tightened and the new engine oil is filled without waiting for the old engine oil to flow completely (you can pay attention to it when you go to the 4S shop or the repair factory for maintenance). Practice has proved that the old oil extracted is more than the chassis. Interested car friends can compare and test it.
Here are some instructions: fine metal debris generated by the wear of engine parts during normal operation will be filtered into the oil filter element and will not deposit at the bottom of the engine, so there is no need to worry that solid particles cannot be extracted. It takes plenty of time to pump oil by yourself. After the oil is pumped for the first time, wait for about 10 minutes. After the oil on the inner wall of the engine flows back, it will be very clean.
2. Will oil pumping have adverse effects on the engine?
The answer is: certainly not. Inserting the oil pump is like inserting the oil dipstick, which will not have any adverse effect on the engine. On the contrary, the sealing screw of the oil outlet should be unscrewed every time the oil outlet of the chassis is drained. Over time, the internal thread of the oil outlet of the engine may wear out and even the sliding wire cannot be sealed normally. It also happens that the thread of the oil outlet of the engine is damaged due to the failure of the repair factory master to master the torque.
Therefore, this oil pumping tool can definitely be used with confidence.

Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.