PLASTIGAUGE (UK) Precision Clearance Gauges 1Pack (10pcs) Model: PL-A / PL-B / PL-C / PL-D / PL-E / PL-X
Measurement of clearance in big-end bearings can be achieved without dismantling the crankshaft.
We highly recommend the use of Silicone and Mineral greases.
PLASTIGAUGE may be used to detect high spots in cylinder heads, pipe flanges etc. It is useful in production, inspection and servicing.
- Marine drive shaft bearings
- Turbine housing bearings
- Pump and pressure system bearings
- Shaft end-float lends itself to direct measurement by Plastigauge.
- Flatness and clearance in pipe-flanges and cylinder heads are readily checked and measured with standard Plastigauge.
- Plastigauge is particularly effective for the measurement of separation in moulding tools and wherever it is required to determine the separation between hidden surfaces.
Size:
-
PL_A (Red): 0.001″ to 0.007″ (0.025mm – 0.175mm)
-
PL-B (Blue): 0.004″ to 0.010″ (0.100mm – 0.250mm)
-
PL-C (Green): 0.007″ to 0.020″ (0.175mm – 0.500mm)
-
PL-D (Brown): 0.020'' - 0.040'' (0.50mm - 1.0mm)
-
PL-E (Black): 0.030'' - 0.070'' (0.75mm - 1.75mm)
-
PL-X (White): 0.00007'' - 0.0018'' (0.018mm - 0.045mm)