Plug type: UK
Main material: iron
Temperature resistance at room temperature: 200°
Voltage: 110-240V
Color: blue handle
packing list:
1 x Foam cutting pen
1 x power adapter
feature:
1.It is suitable for cutting medium and low density foam, pearl cotton, not sponge, but can be bent.
(A pen can only be bent once, it cannot be bent repeatedly, and it cannot be straightened again after being bent, it will be shaped once, otherwise it will break!
)
2. Especially suitable for small craft model making, advertising font making, student manual model making and so on.
3. Lightweight and convenient, the weight of the electric heating pen in hand is only 40 grams.
4. It can be cut from any part of the foam board, and it can be easily cut into any shape. Cut the foam smoothly and quickly, and the sealed edges are clean, leaving no debris.
5. The heating tube is made of stainless steel, the diameter is only 2mm,
6. The preheating speed is fast, and it can be heated to 210°C within 10 seconds.
7. With wire control switch, it is safer and more convenient to use.
8. Made of high-quality iron, heavy-duty materials, durable.
(Single use is 30 minutes, 30 minutes use is recommended to rest for more than half an hour, and the working time should not exceed 3 hours a day.)
1. Due to manual measurement, please allow a difference of 1-3mm, thank you!
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product, please understand.
3. Please do not touch any hot surface. During operation, the tip will become hot.