Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

Liquid Silicone Mold Maker AB 1KG (Food Grade) Hardness 5,10,15, ratio 1:1 食品级硅胶翻模材料 (1公斤装) 硬度5,10,15
No Rating Yet
0 Dijual

/ Per Produk

Penghantaran

Penghantaran Dari
Mainland China
Anggaran Penghantaran
Oct 05, 2024 - Oct 26, 2024

Warna

Variation3

Sila pilih variasi produk terlebih dahulu

Kuantiti

2 Unit lagi
Jumlah
RM 103.2
Gambaran Kedai
Arctic wolf
1 hours ago
Produk 79470
Pengikut 5
Penilaian 5
Sertai 2 Months Ago
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Kitchen & Dining  >  Kitchen Tools  >  Specialty Kitchen Tools
Brand
: NoBrand
Model
: Not Specified
SKU
: 9965801540
Dimension (Length x Width x Height)
: 10.00 x 15.00 x 20.00
Weight(kg)
: 0.6
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Mainland China
Deskripsi Produk
Net Weight A (500g) + B (500g) = 1KGHardness 10/151:1 Instruction of useTesting: Mix A and B components by 20 grams each and stir well to test whether the bubbles can be exhausted within operation time. (Best use vacuum chamber to get rid of bubbles, may put inside fridge to get rid of bubbles if there is no vacuum chamber. )Operation: Stir gently for approximately 1 minute (Do not stir too violently) before pouring. Operation time: Around 20 min at room temperature 25℃, full curing time 2-3 hr.Cautions:1. The product is a platinum catalyst, water, impurities, organic tin catalyst, acid, alkali and other organic containing sulfur, phosphorus, nitrogen can affect the curing of the rubber, these substances are not to be mixed or made contact.*NOTE: Due to density, please refer to the weight rather than the scale on the bottle. Weight error of ±30g is inevitable due to machine packing.Delaying Agent Ratio = Silicone Mixture : Delaying Agent = 200:1 *Please leave a note if you need Delaying Agent*WARNING: The bottles will be randomly dispatched, there may be dents, but it will not affect the content at all. Please purchase at your own discretions!!!净重: A(500克）+ B(500克）= 1公斤硬度 10/151:1食品级硅胶材料产品的使用说明：将A、B组份按各20克混合搅拌均匀，测试操作时间内能不能排完气泡。(使用真空室消泡为最佳，若无真空室可放入冰箱消泡)操作：灌注前，顺着一个方向慢慢搅拌 1分钟（勿过于剧烈搅拌）在空调下室温25℃下产品操作时间大约20分钟，完全固化时间2-3小时。操作时需注意事项：1、本产品为铂催化剂，水、杂质、有机锡催化剂、酸、碱等其他含硫、磷、氮的有机可影响胶的固化，使用时不能混入或者接触这些物质。注意：由于密度的关系，请以重量为准，而不是以瓶子上的刻度。由于机器打包重量误差±30g属于正常延迟剂比例＝搅拌后的硅胶：延迟剂＝２００：１ *需要延迟剂请在订单里标注*随机发货，瓶罐可能会有凹陷，但并不会影响产品本身。请自行斟酌购买！！！
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.