Main materials
Main unit
ABS resin
Bypass selector
ABS resin
Hose
Vinyl chloride
Main unit
Dimensions
About 133(W) × 145(D) × 251(H) mm
Weight
About 1.0 kg (about 2.6 kg when full of water)
Temperature of water used by Water Purifier
Under 35 °C (under 80 °C for bypass selector)
The lowest applicable dynamic water pressure
40 kPa
Pressure of water used by Water Purifier (dynamic pressure)
40 kPa to 350 kPa
Usable water service pressure (static pressure)
40 kPa to 750 kPa
Filtering capacity
6.0 L/min. [at 100 kPa water pressure]
Cartridge Installed In the unit
TK-CS200C
Purification capacity
Free residual chlorine 12 000 L (*1)
Turbidity 12 000 L (*2)
Removable substances
Iron (particulate form) Can be removed (*3)
Guide for time to replace cartridge
About 1 year
Filter material
Non-woven fabric, activated carbon
Components which cannot be filtered out
Iron dissolved in water, heavy metals (silver, copper, etc.), salt (seawater)
Note
?All figures given are for a water temperature of 20 °C.
? This product cannot convert hard water into soft water.
(*1) This value is for a removal rate of 80 % based on JIS S 3201 tests
(*2) This value is for a filtration flow volume of 50 % based on JIS S 3201 tests
(*3) This substance is for a removal rate of 80 % based on specification standard tests (JWPAS B standards) stipulated by the Japan Water Purifier Association (JWPA)
Note that it is not stipulated as part of purification capacity.
(*4) This period applies when 30 liters of water are used a day. If 60 liters are used a day, the cartridge usage limit will be approximately 1/2. The period may also be significantly less depending on the amount of water used and on its quality and pressure.