Big description:
Bottle material: high-density glass
Lid material: high hardness aluminum alloy
Electrode material: platinum titanium + SPE ion membrane
Electrolysis light: colorful light effect
Hydrogen concentration: 1200ppb-1400+ppb
Potential value: -650-0mv
Hydrogen concentration: electrolysis once, can reach 1000ppb-1200ppb. Multiple electrolysis, can reach 1200ppb-1400ppb
Electrolyzed water temperature: recommended below 122°F (50°C)
Charging time of hydrogen suction cup: 1-2H. Charging time of the sprayer: 0.5-1H (about 1H when fully charged). Number of electrolysis: 15 times (under full power)
Cup lid color: gold/silver. Style: Z model. Capacity: 400ml. Display: LDE smart screen. Size: 68mm*68mm*245mm
Steps:
Step 1: Short touch the power button, the screen will display power. Touch the button for 2 seconds, the light will light up, and the bottle will start working for 3 minutes
Step 2: Electrolysis mode
1. Press the button for 2 seconds, the LED light is on, and the screen displays the working mode for 3 minutes; 2. Press the button for 2 seconds, the LED light will be on, the screen will display the working mode for 3 minutes, press the button again soon, the screen will display the working mode for 6 minutes; 3. Hydrogen content display: 500ppb after working for 1 minute, 1000ppb after working for 2 minutes, 1300ppb after working for 3 minutes, and 1400ppb after working for 6 minutes. 200ppb range
Step 3: After the electrolysis process is completed, the bottom of the bottle will beep and the screen will stop flashing. Step 4: If you need to stop working halfway, please press the switch button. The LED light will go out, and the bottle will stop electrolyzing
Maintenance and precautions:
1. Please charge correctly, turn off the charger when the power is full. 2. Please put the bottle in a dry place without sunlight. 3. Keep the bottle away from the fire. Do not heat in a microwave oven, electric kettle, electric cooker, thermos, etc. 4. Do not use volatile solvents such as detergent to clean the glass wall of the bottle. 5. Except for drinking water, do not put drinks in bottles. 6. Do not dismantle the structure without professionals. 7. If you find that the bubbles become less after working for a period of time, the bottom may be impurities after electrolysis. Put the vinegar into the base, pour the vinegar for about 2 hours, and then wash it with drinking water. 8. If the bottle is dry, and there is no water in it, do not turn it on/off. This operation can easily damage the base and cannot work. 9. If the bottle cannot work after opening/closing, the bottle cannot work. Please charge the bottle and wait at least 5 minutes. 10. The quality of the water source must be drinking water/pure water/mineral water/boiled water/distilled water
Packing list:
Smart LED Hydrogen Suction Cup Type Z*1. Nano beauty spray moisturizer *1. Hydrogen suction tube*1. Mineral water hydrogen absorption adapter*1. USB charging cable*1. Exquisite gift box*1. English manual*1
