Reminder:
1, Please use up the test strips within 3 months once you open the vial.
2, This device supports mmol/L ONLY, unit of measure can NOT be converted to mg/dL. 3, The expiry date of blood glucose test strips is for 2 years, kindly check the date of manufacture on the package.
4. The packing box was changed to the red box, not the green box anymore.
Description:
Blood sample: fresh peripheral whole blood, venous whole blood
Calibration sample: venous plasma
Blood volume: 0.6μl
Test range: 20-600mg/dL(1.1-33.3mmol/L)
Test time: 10s
Memory: 200 test results
HCT: 30-60%
The steps to disable the voice function as below:
1, In power off state, press arrow up key for 3s, you will see 'So' in display. 2, Press arrow up key to make it at 'SC' in display. 3, Press power key to confirm, then wait for power off automatically. PS: 'So' mean voice function open, 'SC' mean voice function close.
How to set the date and time?
Press arrow down key for 3s in power off state, adjust year correctly and press power key to confirm, then set month and day.
FAQ:1, How to use GA-3 blood glucose meter? a, Clean: Use an alcohol swab to clean your fingers (except for iodine), and wait for the alcohol volatilize thoroughly, to prevent affecting the measured values.b, Blood sampling: Use lancing device to pierce your finger and let the test strip to collect blood sample.C, Get values: Insert the test strip into the meter and wait for 10s.2, Normal range for type 2 diabetes (just for reference):Fasting blood glucose (FBG): 3.9-7.2mmol/L (70-110 mg/dL).Postprandial blood sugar (2 hours after a meal): 4.4-8.0mmol/L (70-140mg/dL).3, Is the test value accurate?Occasionally a deviation of the blood sugar value is due to incorrect use, food effects, and mood changes. Suggestion is that to test blood glucose value for serval day continuously and regularly, then make a reference.4, Can I reuse the lancet?No. Lancet is one-time used medical device, please don't reuse to prevent infection.In addition, the number of test strips and lancets is matched, so there's no need to reuse.5, Whether low battery can affect the test values?No. In case of low battery, the meter will display battery icon and E-1, at that time, you should exchange the batteries.
