** PROBE COVER IS NECESSARY BEFORE USING THE THERMOMETER TO MEASURE. WARRANTY WILL BE VOID IF PROBE COVER IS NOT USED.
Microlife Ear Digital Thermometer IR 1DB1 Kit contains:
- Ear Digital Thermometer x 1
- Probe Cover x 20
- Lithium CR2032 Battery x 1
- Storage case x 1
FEATURES:
- Allows precise measurement of body temperature in the ear
- Infrared Technology
- 1 second measurement
- Visual FEVER alarm (Green - normal temperature, Red - raised temperature)
- Fever Alarm (10 SHORT beeps alert if the patient have fever)
- Auto display MEMORY of last measured temperature
- Low Battery indication
- °C & °F Switchable
- Certified MDA device (Certification according to MDD Medical Device Directive)
- 2 years WARRANTY
HOW TO USE:
A. TO RELOAD PROBE COVER
1. Place a probe cover onto the storage case hole with paper side upwards.
2. Take the thermometer & VERTICALLY penetrate the probe into the center part of the probe cover.
3. Push the probe completely into the probe cover holder hole.
4. After feeling a slight click, take out the probe with cover attached lightly.
** PROBE COVER IS NECESSARY BEFORE USING THE THERMOMETER TO MEASURE. WARRANTY WILL BE VOID IF PROBE COVER IS NOT USED.
B. TEMPERATURE MEASUREMENT
1. Press the 'ON/OFF' button. The display is activated to show all symbols for 2 seconds.
2. The last measurement reading will be shown on the display automatically for 3 seconds with the 'M' symbol visible.
3. A beep sound is heard. The 'C' or 'F' symbol will flash. The thermometer is now ready to measure.
4. Straighten the ear canal by pulling the outer ear up & back to give a clear view of the ear drum.
5. For CHILDREN UNDER 1 YEAR; pull the ear straight back.
6. For CHILDREN ABOVE 1 YEAR & ADULTS; pull the ear up & back.
7. While pulling the outer ear, insert the probe snugly into the ear canal & press the 'START' button.
8. Release the button when there is a 'BEEP' sound. This indicates measurement is complete.
9. Remove the thermometer from the ear. The display will show the measured temperature.
