Malaysia Leading Online Shopping Marketplace

Why You Need THINKTOOL Mini 2?

All Cars （include proton and perodua ） Lifetime Free Full systems diagnostic+Full obd2 functions+28 maintenance reset

Compared with THINKTOOL mini, thinktool Mini 2 support CANFD Protocals

OE-level Full System Diagnose Lifetime Free for All Cars

Thinktool mini car scanner can get OE-level analysis of ECM, transmission, ABS, airbag, SAS, DPF, EVAP, TPMS, BMS, EPB, among other available on-board systems. Pull, clear their codes; turn off related warning lights; check freeze frame data; view live stream in detailed text, merged graph you need to diagnose, repair, and maintain for majority of car makes and models worldwide.

Advantages of THINKTOOL Mini 2

1.Free system-wide code reading, code clearing, data streaming and upgrades for all models.
2.28 reset function is free to use
3.After subscribing to the software, the whole system can be diagnosed with full functions (action test, special function, cding can be carried out).
4.Android system can be upgraded online lifetime free update.
5.The whole system diagnoses more than 93 automobile brands.
6.Diagnosis covers all models that support OBD protocol after 1996.
7.Equipped with VIN code intelligent identification models.
8.THINKCAR series design, dustproof, shockproof, easy to store
9.5.99-inch display is convenient for you to diagnose the car in real time
10.2G RAM/ 32G ROM,Support Bluetooth and WiFi connection

11. Compared with THINKTOOL mini, new version thinktool mini 2 support CANFD Protocal, so support more cars.

All Cars Lifetime Free 28 Reset Services

1.Oil Lamp Reset Service
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
2. EPB Electronic Park Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.
3. BAT battery service
Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
4. DPF Diesel Particulate Filter Reset
Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
5.SAS Steering Angel Sensor Reset
Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.
6.TPMS Tire Pressure Monitoring System Reset
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
7. IMMO Key Programming
The unique car key programming and read pin code function, it is mainly used to disable the lost vehicle keys and program a new replacement key fob.
8. ABS Bleeding
ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.
9. Sunroof Reset
The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
10. Suspension Reset
Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.
11. Gearbox (Transmission )Reset
Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
12. AFS Headlamp Reset
'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.
13. Injector Coding
Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.
14. Throttle Adaptation
The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.
15.Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
16. EGR Reset
Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.
17. A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
18. Adblue Reset(Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.
19. Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator.
20. Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
21. AT Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift
22. Language Change
This function is used to change the system language of the vehicle central control panel.
23. Nox Sensor Reset
Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.
24. ODO Reset
a) ODO reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage.
b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it
is necessary to do ODO reset after maintenance.
25. Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).
26. Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
27. Transport Mode
ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.
28.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.

Support Bi-Directional Control (Actuation Test) & ECU Coding,

Cost: $49.95/year (you can buy from ThinkCar Store directly)

Actuation Test / Bi-directional control

Bi-Directional Control capability and is capable of performing Active Tests to access vehicle-specific subsystems and component tests. The tester outputs commands to the ECU to drive the actuators in order to determine the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators.You can test whether the execution components work normally by bi-directionally monitoring the operation actuator.

ECU Coding

The advanced coding function is used to re-flash the vehicle control modules, which allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements, providing solutions for the issues of drivability, fuel efficiency, power loss, fault codes, durability of mechanical parts etc. But please note, ecu coding are NOT universal for all vehicles, please check compatibility with VIN number before purchase.

You can modify the adaptive data for vehicle control modules, after repairs or replacements of vehicle parts including power window, illuminated entry, warning, light control, slide roof, air conditioner, and more.

Support Fast Printing Diagnostic Report

Automatic Read VIN (12)

Live Data Stream in GraphSpecifications

Details

Cover Up to 126 Major Vehicle Manufacturers, more models are updating:

- For American car brand

For Ford(Australia), LINCOLN, BUICK, Chrysler, GM, FORD, CHRYSTER, CADILLAC, CHEVROLET, DODGE, FIAT(BRAZIL), GM(BRAZIL), Jeep, SGM, etc...

- For European car brand

For AstonMartin, For Benz, For Sprinter, For BMW, For Ferrari, For Fiat, For LandRover, For Maserati, For Opel, For Peugeot, For Porsche, For Lancia, For LT3, For Maybach, For Mini, For Seat, For Skoda, For Vauxhall, For Volkswagen CV, For Renault, For Saab, For Smart, For Volvo, For Volkswagen, For Abarth, For Alfa, For Audi, For Bentley, For Bugatti, For Citroen, For Dacia, For Jaguar, For Lambor Ghini, etc...

- For Asia car brand

For Acura, For Daewoo, For Daihatsu, For Honda, For Hyundai, For Infiniti, For Isuzu, For Kia, For Lexus, For Maruti Suzuki, For Mazda, For Mitsubishi, For Nissan, For SsangYong, For Subaru, For Suzuki, For Toyota, For GTR, For Scion, etc...

Support 15 Languages

English, French, German, Spanish, Italian, Portuguese, Japanese, Russian, Polish，Hungarian, Arabic, Greek, Slovak, Traditional Chinese, Korean

Package includes:

• THINKTool mini 2*1,
• Carrying Bag*1,
• OBD-II cable*1,
• charger*1,
• Multilingual user manual*1