Parameter:
Name:Dragonhawk X8
Motor Type: Brushless motor
Stroke: 4mm
Speed: 180rpm-9000rpm
Battery Capacity: 1500mAh
Charging Time:2hrs
Working Time:3hrs
Charging method: Type-C
Weight:144g
Diameter:32mm
Length:113mm
instruction
1,hold the button 2 seconds,When display returns to the speed before shutdown and is in standby mode,if working Switch on
2,180-2000rpm single press +/- 45rpm increase or decrease speed,long press + /- increase or decrease speed 2000 -9000rpm
single press +/- 175rpm increase,long press + /- fast increase or decrease speed
3,Display screen timing, battery level, and speed cycle switching with a 3-second interval
At the same time, the indicator dot will also switch to the corresponding icon when the device start.
4,memory valtage:Pre set 5 mode memory RPM,press Cycle key to change,memory RPM will be record automatically
5,long press Switch on/off 2 seconds close the device
will be close the machine without outpute in 5 minutes
6,display screen will Real charging capacity when charging,
When fully charged, the battery level shows 100, and at the same time, overvoltage protection is entered
7,Not Support while tattooing while charging
