Product Name: Cradle Controller
At the bottom, use the S hook to hook the cradle. The controller can adjust the speed of swinging up and down. The default electronic music is ‘‘Only Mother in the World
The hanging type is a new type of controller,
This product is a portable, energy-saving and durable electronic multifunctional cradle controller.
It adopts hanging type up and down movement, which has the characteristics of high power, low energy consumption, stable performance, safety and reliability, and upgraded version! There is music and can be timed. (Need to match with cradle)
Features:
1: The cradle is rocked up and down, so as not to damage the brain of BB
2: You can control the amplitude of shaking up and down (1-10 gears can be adjusted, gear 1 is the largest, gear 10 is the smallest)
3: The shaking time can be set (60, 180, 120, 240 hours can be timed)
4: It can be placed in the living room so that you can look after the BB while doing other things
5: It's easy to coax BB to sleep, so you don't need to hug your body every day
6: The load-bearing range of this machine: within 20KG.
Step:
1: First of all, please determine the baby's weight. The number of springs used varies according to the baby's weight:
6 catties -12 catties (using 2 springs)
12 catties-18 catties (use 3 springs)
18 catties -24 catties (using 4 springs)
24-30 catties (use 5 springs)
2: Put the baby and the objects in the cradle, set the controller switch to the ON end, the speed control knob to the O position, and then adjust the time selection knob to the rocking time you need.
3:: Rotate the speed adjustment knob slowly in the direction of the larger scale, and pause for 8 seconds for every half of the scale. Observe whether the shaking size is suitable, and adjust it until it is suitable.
4: After the machine is adjusted, the content (weight) in the cradle remains basically unchanged, and it is not necessary to use the shifting knob when it is used again, just press the ON end of the switch. The cradle shakes normally after 8 seconds. The timing knob can be adjusted to set the baby to automatically shut down after sleeping. When the load increases or decreases (or the voltage is unstable or the spring is added), the shaking is inappropriate, the gear shift knob should be adjusted.
Notes:
1: It is found that the transmission rope makes a very loud "pop" sound during the shaking process. To reverse the speed control button a little until the "pop" sound disappears, make the shaking size suitable, so that the transmission rope can be durable.
2: Different weight loads (the machine is limited to 18KG) The speed control knob should be adjusted to different scales before shaking. The larger the scale at the position of the speed control knob, the greater the shaking.
3: After turning on for 8 seconds, if you can't shake it, check whether the wire plug and socket are in good contact, whether the transmission rope is stuck outside the wheel, and whether the speed control button is adjusted to the right position. The time selection knob is the speed indicator at the ON end.
4: The timing function is an extra function of the controller. If it is not turned on, it will not affect the use. It will always swing up and down. The timing is turned off by the countdown. There are 4 gears from 60-120-180-240 minutes. Press it once for 60 minutes, and then press after 240 to turn off the timer. You can also directly turn off the power switch when you don’t want to use it.
