Bacfree Swiss Tech Filter Element Replacement for BS-series Kitchen Tap Ceramic Filter can be used in BS-Series tap water filters BS3, BS3A, and BS8.
HIGHLIGHTS
1. Remove harmful bacteria sediment, chlorine, organic chemicals and heavy metals
2. With Silver Ion Disinfection
3. Made in Switzerland
? Filter lifespan: 12 months or 5000 litres
? Filtration rating: as small as 0.2 microns
? Reduces turbidity: >99.99%
? Reduces chlorine (2ppm): >97%
? Reduces lead particles (150ppb): >95%
? Removes pathogens: >99.99%
- Coli
- Coliform
- Serratia marcescens
- Cryptosporidium
- Vibrio cholerae
- Giardia
- Salmonella typhi
How does the BS-series tap water filter work?
BS-series tap filters use a double layer filtration system that has been used and trusted since 1982 nationwide.
1st layer filtration
The ceramic section of the filter is a cleanable ceramic surface which removes particles as small as 0.2 microns and harmful organisms.
It also contains germicidal silver ion which acts as a disinfectant that inhibits the growth of bacteria within the filter matrix.
2nd layer filtration
The inner carbon section of the filter is made up of a unique blend of activated carbon which removes chlorine, foul taste, and odour.
With the thorough filtration through the filter elements, boiling of water is no longer required before consumption. The filter element can remove all particles as small as 0.2 micron, which is extremely fine.
At the same time, 99% of harmful microorganisms will also be filtered out. Hence it is safe to drink filtered water directly from the tap connected to BS-series water filters.
Cleaning and maintaining a BS-series water filter is easy and straightforward. To keep the filtered water clean and healthy, clean the filter element once a week.
HOW TO CLEAN
It’s a pretty simple process:
Step 1
Simply unscrew/turn the cap of the filter (doesn’t require any tools). This will allow you to remove the filter by simply unscrewing/turning it.
Step 2
When you receive your new BS-series water filter, you will also get a special sponge provided for washing the surface of the filter element. Use the sponge to clean the filter element with water.
Step 3
After the element is clean, replace it into the water filter by screwing/turning it back into the water filter cap and housing. Your filter element is now clean and ready to be used.
After every 1 year, or 5,000 litres of usage, the filter element needs to be replaced.
Simply buy a new filter element from Bacfree and replace the old filter and you’re good to go!
