Features
1. 2200W high-power motor provides 15000rpm speed, and the maximum cutting depth is 33mm/1.3in.
2. This practical chainsaw can make right angle and 0°-45° oblique cutting, users can make oblique cutting by adjusting the angle of 0-45°.
3. Double insulation body shell protection, high-strength aluminum shell protective cover, anti-splash, anti-break, safe cutting.
4. Ventilation and dust-proof design, the wrap-around spiral suction air quickly dissipates heat, and the motor is more durable.
5. The wide and thick base is made of stainless steel, which is durable and has a long service life.
6. Self-locking function design, just press the lock button to maintain the speed instead of pressing the switch continuously, thus minimizing finger fatigue.
7. The ergonomic handle fits the palm, making the machine easy to hold and use, providing a comfortable grip during long-term use.
8. Widely used in construction engineering, decoration operation, stone processing; mainly used for cutting and processing non-metallic hard and brittle materials such as terrazzo, marble, granite, ceramic tile, asbestos cement board and glass fiber reinforced plastic.
Precautions for use
1. Before work
(1). Wear work clothes and goggles. If a female worker has long hair, curl up her hair and wear a work cap.
(2). The power switch, the tightness of the saw blade, the saw blade guard or the safety baffle should be checked in detail. The operating table must be stable, and there should be sufficient lighting for night operations.
(3). Turn on the main switch, make a few laps with no load, and allow it to start after confirming safety.
2. When working
(1). It is strictly forbidden to operate with gloves. If dust is caused during operation, wear a mask or face shield.
(2). Do not attempt to saw small unclamped workpieces.
(3). This cutting machine is only allowed to cut profiles.
(4). Do not perform powerful sawing operations, and make the motor reach full speed before cutting.
(5). No one is allowed to stand behind the saw.
(6). Do not lean over or go around the sawing machine, and do not release any hand or lift your arm from the saw or workpiece when the saw blade is not stopped.
(7). Do not operate when the shield is not in place, and do not place your hands within 15cm from the saw blade.
(8). Before repairing or replacing accessories, the power must be cut off and the saw blade stops completely.
(9). If any abnormal sound is found, stop the inspection immediately.
3. After work
(1). Turn off the main power.
(2). Clean and organize workstations and grounds.
Notes
1.Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2.Please allow 1-3cm measuring deviation due to manual measurement.
Packing List
1*Electric Cutter
2*Stone saw blades
1*Wood saw blade
1*Metal saw blade
2*Installation wrench
1 Pair*Gloves
2*Spare carbon brushes
1*Instruction manual
