DSO-TC2 Product Manual:
https://www.mediafire.com/file/ppeajlhbdm1szo4/FNIRSI-1014D+Product+Manual.pdf/file
Introduction：
FNIRSI-TC2 ingeniously integrates digital oscilloscope, electronic component tester, PWM signal generator and other functions into one.Equipped with large-size color dot matrix TFT display.Built-in rechargeable lithium battery.Bring more practical functions to users with a small size,Also has good portability.
FNIRSI-TC2 has various working modes such as oscilloscope and component tester.Each time you click the power button, it will enter the mode selection interface.Press the [Up] and [Down] keys of the direction keys to select,Select “Mos Test” item, press【OK】key to enter component tester mode;Select the “Oscilloscope” item, press【OK】key to enter the oscilloscope mode.
"Mos Test" mode can test various types of transistors, and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance; can test capacitance, resistance, inductance components, etc.
FNIRSI-TC2 is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordless components, and preliminary screening of small batch components."Oscilloscope" mode to test the signal waveform of the circuit.Support online operation with computer, you can refresh the official firmware by yourself and complete the upgrade.
It is hoped that FNIRSI-TC2 can make the study and work of the majority of users more efficient and interesting.
DSO-TC3 Product Manual:https://www.mediafire.com/file/3eddj8oght8m0q3/TC3_product_manual.pdf/file
DSO-TC3 Features:
- Digital Oscilloscope Function
- Electronic Component Tester
- Signal Generator
- Continuity Test
- Voltage Test
- Temperature and Humidity Measurement
- Infrared Decoding
- 2.4-inch Color TFT Display
- Built-in Rechargeable Lithium Battery
- Good Portability
DSO-152 Features:
Features:
【Compact Size】: Lightweight and portable, space-saving design makes it can be carried out to work. It is a utility maintenance and DIY tools for on-site debugging.
【Fine Workmanship】: High-sensitivity buttons are easy to use, Type-C port supports firmware upgrade and charging, folding bracket for convenient placement, gear toggle buttons to switch settings as needed.
【2.8inch Digital Display】: Equipped with 320*240 resolution color display, with bright colors and high contrast, you can see the data clearly.
【Efficient and Accurate】: Multiple parameters measurement, the oscilloscope has a real-time sampling rate of 2.5MS/s, 200kHz bandwidth, with complete trigger functions (single, normal, automatic), both for periodic analog signals or non-periodic digital signals can be freely used, support switch between rising-edge trigger mode and falling-edge trigger mode, support up to ± 400V voltage signal measurement.
【1KHz Calibration Squarewave】: Supplied with a 1KHz calibration squarewave, easy and convenient probe calibration.
【One-button Automatic Adjustment】: Equipped with efficient one-button AUTO that displays the measured waveform without tedious adjustment. With waveform measurement display, a variety of waveform measurements to meet your daily needs.
【Wide Applications】: Intelligent anti-burning, applicable to a variety of occasions, suitable for utility measurements, DIY learning, automobile repairing, home appliance repairing, research and teaching, outdoor maintenance, etc.
Specifications:
Name: Digital Oscilloscope
Material: plastics
Type: standard configuration, high configuration (optional)
Battery: 1 * rechargeable 1000mAh lithi um battery (included)
USB charging: 5V/1A
Display: 2.8inch/PPI:320*240
Bandwidth: 200KHz
Realtime sampling rate: 2.5MS/s
Vertical sensitivity: 10mV/Div-20V/Div (in 1-2-5 increments)
Time base ranges: 10μs/Div-50s/Div (in 1-2-5 increments)
Calibration squarewave frequency: 1K
Duty cycle: 50%
Voltage ranges: X1:±40V (Vpp:80V); X10: ±400V (Vpp:800V)
Trigger mode: automatic/regular/single
Item size: 99 * 68 * 20mm / 3.90 * 2.68 * 0.79in
Item weight: 100g / 3.53ounce
Package size:
Standard configuration: 125 * 85 * 40mm / 4.92 * 3.35 * 1.57in
High configuration: 210 * 150 * 50mm / 8.27 * 5.91 * 1.97in
Package weight:
Standard configuration: 168g / 5.93ounce
High configuration: 243g / 8.57ounce
Packing list:
Basic model:
1 Tester
1 Type-C charging cable
3 Test hook
1 Ordinary probe
Highend version
1 Tester
1 Type-C charging cable
3 Test hook
1 Ordinary probe
1 Adapter
1 P6100 High Voltage Probe
