The ultra-sensitive sensor of Elitech ILD-300 Leak Detector allows it to detect even the most difficult ones like R-134a, R-404A, R-407C, R-410A and 1234yf refrigerants. Our exclusive solid electrolyte sensor technology reduces heat and gives the sensor longer life than traditional heated diode or corona detectors.
Package Includes:
-
1 x Leak Detector
-
1 x Packet of Filters
-
1 x USB Cable
-
1 x Adaptor
-
1 x UV light
-
1 x User Manual
-
1 x Case
Advanced Sensor and Superior Sensitivity
Compared to traditional corona sensor or heated diode sensor, ILD-300 adopts the most advanced sensor and innovative functions:
-
10 Years' sensor life
-
Strong anti-interference
-
Wide range and sensitive reaction
-
Detects all halogenated refrigerants
-
Meets EN14624,SAE-162,SAE-2791 and SAE-2913 standards.
-
UV light used for detecting refrigerant leakage
-
Earphone jacket designed for noisy environments.
-
3 Selectable Sensitivity Levels -High/Medium/Low
-
Maximum sensitivity up to 0.14oz/yr
-
Suitable for all detection scenario
-
Smaller leak, higher sensitivity grade
TFT Screen
-
TFT LCD display and buzzer alarm
-
Animated sensitivity indication
-
Real-time battery allowance display
-
Sensor faulty indicator
-
Reset and Mute function
Lithium Battery for 6 Hours
-
Battery: built-in rechargeable lithium battery 3.7V 3000mAh
-
Working time: continuous 6 hours
-
Charging time: 4 hours
Gas Selecting Function
ILD-300 is most progressive one of the ILD series as it adds the new function to choose the targeted refrigerant gas before detection, Thus, it will give more accurate and faster response when a very small leakage is found.Plus, 14.37-inch flexible probe allows detection in difficult and hard-to-reach areas.
Peak Function
Peak function stores the highest change in refrigerant concentration achieved while continuing to detect leaks.
Turn the " Peak“ on, it will leave a record to let you know if there is a leakage whether you are in the detection areas or left there. It is a good way to avoid the ignorance of the leakage when detecting.
Specification:
-
Sensor principle: spectrum absorption
-
Preheating time: 30s
-
Reset time: 2s
-
Response time: 3s
-
Automatic shutdown: 10 minutes without operation
-
Weight: 2.8 lb
-
Size: 7.9*3.3*1.5 inches
-
Operating temperature: -10°C to 52°C (14°F to 125.6 °F)
-
Operating relative humidity: 50%~85%RH
-
Storage temperature: -20°C to 60°C (-4°F to 140 °F)
