Welcome to JOYUHON products, factory direct sales, all products are strictly tested and guaranteed to be 100% original and authentic, please rest assured to buy; we ship quickly in Malaysia, just to give you a better shopping experience!
The package includes:
1 x power inverter
2 x battery clip
1 x car plug (gift)
1 x English manual
Specification:
Model: Y6000W/Y4000W
Name: 6000W vehicle power inverter.
Input voltage: DC 10.5V~15V,
(When the battery voltage is lower than 10.5V, the inverter low voltage protection, when the battery voltage is higher than 15V, the inverter high voltage protection)
Output voltage: AC 220V
The output frequency is: 50Hz
Peak power: 6000W Rated power: 500W
Peak power: 4000W Rated power: 300W
Output waveform: modified sine wave.
Product size: 20.5X11.7X5.8cm
Packing size: 22*10*14.5cm
Weight: 0.8 kg
Advantage:
[6000W/40000W Power Inverter] Car power inverter with 2 USB ports and AC power socket. Surge power: 6000W/4000W, the inverter provides a free cigarette lighter and 2 battery clips, providing 500W/300W continuous power, 6000W/4000W peak power (please ensure that the total rated power of the connected equipment is less than or equal to 500W/300W).
[LED green and red working light] When the inverter is working normally, the green LED light works and tells you that it is working normally, but when it is in a protection state such as low voltage, high voltage, over temperature or overload, the red LED light is on and needs to be turned off. Inverter, check which protection function is working, and the inverter can work again after trying to solve it.
[LED Battery Display] The battery power bar displayed by the LED displays the battery capacity, which can alert you when the battery is dead. When the battery is connected to the inverter, this LED screen works and displays the real-time capacity of the battery. It has five levels (lattices) of battery power bars, and each grid represents 20% of the battery power. Be yours
When the battery is dead, the display will flash to remind you that you need to recharge the battery.
[Dual USB fast charge] 1 AC socket and 2 USB ports can provide 100% fast charging for mobile phones, computers, laptops, breast pumps, shavers, medical rescue equipment, emergency equipment, etc., and can be used as emergency power supplies
[Multiple protections] Built-in fuse, safe charging design, cooling fan to prevent overheating of the on-board power converter, saving electricity and energy. Overvoltage, overload, overcurrent, short circuit, undervoltage, overheating, and short circuit protection.
[Lightweight design & top quality] Lightweight and compact, very suitable for vacation, camping and work trips. It can be plugged into almost any vehicle with 12V power output, providing charging opportunities anywhere.
CAUTION!!!!!!
-1. This is an improved sine wave inverter, which is not suitable for devices with built-in motors, hair dryers, air conditioners, coffee machines, water pumps, induction cookers, refrigerators and microwave ovens. Please ensure that the power of the connected equipment with the total rated power ≤ 500W/300W
-2. When using a car inverter, tighten the positive (+) and negative (-) terminals
-3. If the converter is directly connected to the car power supply. The maximum output power must be less than 150W. If it is higher than 150W, we strongly recommend that you use the alligator clip for the battery, because the car power supply may not provide more than 150W of power.
-4. The car converter is only suitable for DC12V and Car, not for DC 24V and aircraft
-5. Please do not put the inverter in the ON position before driving, otherwise it is easy to damage the inverter before connecting the battery. The correct operation is to connect the battery first and then turn on the inverter switch
-6. It is normal for the inverter to heat up during use. In order to get the best use effect, please place the inverter on a flat surface. The workplace should meet the following conditions:
1. Keep it dry, do not allow the inverter to contact water or other liquids, and keep the inverter away from moisture or water.
2. In a cool environment, keep the temperature between 0 degrees Celsius and 40 degrees Celsius. Do not place the inverter close to heat dissipation holes or other equipment. Try to avoid direct sunlight to the inverter