Advantage:
-Al-Mg alloy shell, light weight, good thermal conductivity, using STM chip technology, high reliability, strong impact resistance, low solder joint defect rate, reducing battery and radio frequency interference
-Double LED digital display with input voltage and output voltage
-The conversion rate is up to 90%, the conversion loss is reduced by 30%, and the continuous power is increased by 30%, which will more energy-saving and safe.
-AC Three-hole socket, strong compatibility, suitable for most electrical appliances.
-Built-in fuse, safe charging design and cooling fan can prevent the car power converter from overheating, thus saving power and energy. Reverse protection, overvoltage protection, low pressure protection, overload protection, high temperature protection, low pressure alarm protection, smart fan protection, can protect the safety of the inverter and electrical appliances
feature:
-Cars is normally use 12V Converter . An excellent pure sine wave inverter can provide more alternating current than the grid.
-Pure sine wave inverter has little interference to precision equipment, low noise, and strong load adaptability. They can meet all AC load applications (including inductive loads such as electric fans, refrigerators and air conditioners) without any interference (such as noise), and will not cause any damage to the equipment.
Prevention Attention:
The installation and commissioning of this equipment should be carried out by professional electrical service personnel who are familiar with the structure and operation hazards of the equipment. Failure to observe this precaution may result in personal injury.
1. Do not connect this device to subscriber line boxes, such as home telephone lines.
2. Please keep the inverter in a cool environment. The suitable temperature should be 10
3. After long-term use, the inverter will generate heat and avoid contact with heat-sensitive substances. Ventilation holes are smooth and well cooled.
4. Please do not open the machine due to the danger of high voltage, please use appropriate wires to prevent the inverter from burning excessively.
5. Make sure that the inverter is properly connected to the battery, otherwise the fuse of the inverter will blow. When not using the machine, turn off the switch.
