Malaysia Leading Online Shopping Marketplace

Specification:

Product name: 4000W Pure Sine Wave Inverter

Material: Metal

Colour: Black

Rated power: 800W

Peak power 4000W

Input voltage: 12V/24V

Output voltage: 220V

Applicable range of rated voltage of electrical appliances: 200~240V

Output waveform: Pure Sine Wave

Waveform frequency: 50Hz

Product size: 24.5*10.3*6cm

Net weight: 1.0KG

?

1. Peak power 4000W pure sine wave inverter: 220V AC power socket is provided, and the maximum rated output power is 800W. Provide continuous DC to AC power output. It can load household appliances below 800W. The induction electric water pump or air conditioner cannot be used, and the power supply is insufficient.

2. Aluminum magnesium alloy shell, light weight, good thermal conductivity, STM chip technology, high reliability, strong impact resistance, low solder joint defect rate, reduce battery and RF interference.

3. Double LED digital display with input voltage and output voltage. The conversion rate will reach 90%, the conversion loss will be reduced by 30%, and the continuous power will be increased by 30%, making it more energy-saving and safer.

4. AC universal socket, with strong compatibility, is suitable for most electrical appliances.

5. The built-in fuse, safe charging design and dual cooling fans can prevent the vehicle power converter from overheating, thus saving power and energy. Reverse protection, overvoltage protection, low-voltage protection, overload protection, high temperature protection, low-voltage alarm protection and intelligent fan protection can protect the safety of inverters and electrical appliances.

characteristic:

-Cars usually use 12V converters. The truck uses 24V converter, and the battery car uses 48V or 60V converter. An excellent pure sine wave inverter can provide more AC power than the power grid.

-Pure sine wave inverter has small interference to precision equipment, low noise and strong load adaptability. They can meet all AC load applications (including inductive loads such as electric fans, refrigerators and air conditioners) without causing any interference (such as noise) and damage to the equipment.

?167.99Matters needing attention:

The installation and commissioning of this equipment shall be carried out by professional electrical service personnel who are familiar with the equipment structure and operation hazards. Failure to observe this precaution may result in personal injury.

1. Do not connect the equipment to 220V power supply.

2. Please place the inverter in a cool environment. The appropriate temperature should be 0 ° C~50 ° C, avoiding direct sunlight and ventilation holes. Inverters shall be kept away from flammable materials or gases.

3. After long-term use, the inverter will generate heat and avoid contact with heat sensitive substances. The ventilation hole is smooth and well cooled.

4. Please do not open the machine because of the danger of high voltage. Please use proper wires to prevent the inverter from burning excessively.

5. Make sure the inverter is correctly connected to the battery, otherwise the fuse of the inverter will blow. Turn off the switch when the machine is not in use.

6. Sine wave inverter refers to the equipment working with built-in motors such as hair dryer, air conditioner, coffee maker, water pump, electromagnetic oven, refrigerator and microwave oven. When purchasing, the calculated power should be 3 times of the power of the appliance itself. If you are unclear, please consult the seller. The total rated power of the connected equipment of the inverter is ≤ 800 watts

7. When using the automobile converter, tighten the positive (+) and negative (-) terminals

8. If the converter is directly connected with the cigarette lighter. The maximum output power must be less than 150W. If it is higher than 150W, we strongly recommend that you use the alligator clip as the battery, because the automobile cigarette lighter may not be able to withstand the power exceeding 150W.

9. The power inverter has 4 input voltages. Please purchase according to the battery voltage provided. If your battery is 12V, please purchase 12V power inverter.

10. Before starting the vehicle, please do not put the inverter at ON position. It is easy to damage the inverter before connecting it to the battery. The correct operation is to connect the battery first, and then turn on the inverter switch.

11. When the inverter is used, it is normal for the inverter to become hot. In order to obtain the best use effect, place the inverter on a flat surface. Please note that the cooling fan of the power inverter is an intelligent fan, and the inverter will not start to operate until the temperature reaches 45 ℃. The fan is not broken.

?

?