-
Please note that the inverter itself has various protection functions. Remember not to install a circuit breaker device between the inverter and the battery, as this may damage the inverter!!!
-
Specification:
-
Product name: Pure Sine Wave Inverter
-
Material: Metal
-
Colour: Black
-
Specifications: 3 specifications can be selected
-
Rated power: 3000W / peak power 18000W
-
Rated power: 2500W / peak power 15000W
-
Rated power: 2000W / peak power 12000W（Can be equipped with remote control）
-
Input voltage: Five voltage options (12V/24V)
-
Output voltage: 220V
-
Applicable range of rated voltage of electrical appliances: 200~240V
-
Output waveform: Pure Sine Wave
-
12000W Product size: 27.7*15*7.5CM,Net weight: 2.2KG
-
15000W Product size: 28.5*18*14CM,Net weight: 4.4KG
-
18000W Product size: 32.5*18*14CM,Net weight: 5KG
Advantage:
- The high-power pure sine wave inverter is more suitable for household appliances, can load more household appliances at the same time, and is more stable and does not damage the appliances.
- It can load motor products such as air-conditioning water pumps.
- Aluminum-magnesium alloy shell, light weight, good thermal conductivity, using STM chip technology, high reliability, strong impact resistance, low solder joint defect rate, reducing battery and radio frequency interference.
-Dual LED digital display input voltage and output voltage.
- The conversion rate is as high as 90%, the conversion loss is reduced by 30%, and the continuous power is increased by 30%, which is more energy efficient and safer.
-AC three-hole socket, strong compatibility, suitable for most electrical appliances.
- Built-in fuse, safe charging design and cooling fan prevent the on-board power converter from overheating, thus saving power and energy. Reverse connection protection, overvoltage protection, low voltage protection, overload protection, high temperature protection, low voltage alarm protection, intelligent fan protection, can protect the safety of inverters and electrical appliances.
Feature:
- Cars usually use 12V converters. Trucks use 24V and electric cars use 48V. A good pure sine wave inverter can provide more alternating current than the grid.
-Pure sine wave inverter, less interference to precision equipment, low noise and strong load adaptability. They can satisfy all AC load applications (including inductive loads such as electric fans, refrigerators and air conditioners) without any disturbance (such as noise) and without causing any damage to the equipment.
Prevention:
-1. This is a pure sine wave inverter, which uses a device with a built-in motor such as a water pump. The power of the inverter is selected by multiplying the power of the electrical appliance by 3 times. Make sure that the total power rating of the connected equipment is less than or equal to the inverter power rating.
-2. When using a car inverter, please tighten the positive +) and negative -) terminals
-3. If the converter is connected directly to the car power supply. The maximum output power must be less than 150W. If it is above 150W, we strongly recommend that you use alligator clips to power the battery, as the car power supply may not be able to provide more than 150W.
-4. Please do not put the inverter in the ON position before driving, otherwise it is easy to damage the inverter before connecting the battery. The correct operation is to connect the battery first and then turn on the inverter switch
-5. It is normal for the inverter to heat up during use. For best use, place the inverter on a flat surface. The workplace should meet the following conditions:
1. Keep it dry, do not let the inverter come into contact with water or other liquids, keep the inverter away from moisture or water.
2. In a cool environment, keep the temperature between 0 degrees Celsius and 40 degrees Celsius. Do not place the inverter near cooling holes or other equipment. Try to avoid direct sunlight on the inverter.
