Please note that the inverter itself has various protection functions. Remember not to install a circuit breaker device between the inverter and the battery, as this may damage the inverter!!!
Specification:
Product Name: Pure Sine Wave Inverter
material: metal
Colour: Black
Rated power: 1500W/peak power 10000W
Input voltage: five voltage options (12V/24V/48V/60V)
Output voltage: 220V
Applicable range of rated voltage of electrical appliances: 200~240V
Output waveform: pure sine wave
Waveform frequency: 50Hz
Product size: 25.8*15*7.5CM (13*5.9*2.95 inches)
Net weight: 1.8KG
Advantage:
-Al-Mg alloy shell, light weight, good thermal conductivity, using STM chip technology, high reliability, strong impact resistance, low solder joint defect rate, reducing battery and radio frequency interference
-Dual LED digital display input voltage and output voltage
-The conversion rate is as high as 90%, the conversion loss is reduced by 30%, and the continuous power is increased by 30%, which is more energy-saving and safe.
-AC three-hole socket, strong compatibility, suitable for most electrical appliances.
- Built-in fuse, safe charging design and cooling fan prevent the car power converter from overheating, thus saving power and energy. Reverse protection, overvoltage protection, low voltage protection, overload protection, high temperature protection, low voltage alarm protection, intelligent fan protection, can protect the safety of inverters and electrical appliances.
Feature:
-Cars usually use 12V converters. A good pure sine wave inverter can provide more alternating current than the grid.
-Pure sine wave inverter, less interference to precision equipment, low noise and strong load adaptability. They can satisfy all AC load applications (including inductive loads such as electric fans, refrigerators and air conditioners) without any disturbance (such as noise) and without causing any damage to the equipment.
Prevention Attention:
The installation and commissioning of this equipment should be carried out by professional electrical service personnel who are familiar with the structure and operation hazards of the equipment. Failure to observe this precaution may result in personal injury.
1. Do not connect this device to subscriber line boxes, such as home telephone lines.
2. Please keep the inverter in a cool environment. The suitable temperature should be 10 °C ~ 50 °C, and avoid direct sunlight and ventilation holes. The inverter should be kept away from flammable materials or flammable gases.
3. After long-term use, the inverter will generate heat and avoid contact with heat-sensitive substances. Ventilation holes are smooth and well cooled.
4. Please do not open the machine due to the danger of high voltage, please use appropriate wires to prevent the inverter from burning excessively.
5. Make sure that the inverter is properly connected to the battery, otherwise the fuse of the inverter will blow. When not using the machine, turn off the switch.
