Specifications
LED: High powerful LED
Operating voltage: 3.0V-4.2V
Beam Angle: Center 19°; Flood 60°
Battery options: 1x 21700 Li-ion Battery
Dimension: 133.9mm (length) x 36mm (head diameter)
Weight: 130g / 0.29lb
Reflector: Smooth Reflector
Driver: Boost constant current driver
Flashlight body: Aerospace grade 6061 grade aluminum alloy, CNC machining to hard-anodized to military grade specification type III, anti-abrasive finish to get solid built body, anti-crash geometry and better heat exchange.
Water resistance i.a.w. IP68
Reverse polarity protection to protect against improper battery installation.
Advanced Temperature Regulation (ATR) technology: ATR automatically reduces the brightness level when the driver temperature reaches 60°C to prevent overheating
Low voltage warning
Operation Instructions
DL02 professional dive light with a simple user face, easy to use by one hand,friendly to every user.
If rotated the switch right, you can turn on the medium and low mode; if rotated the switch left, you can turn on the high mode directly.
Power Indicator
The LED indicator in the side switch shows the power status for 5 seconds after turning DL02 on.
Green = remaining battery power is good (75%-100%).
Flashing Green=remaining battery power is enough(50%-75%)
Red = remaining battery power is poor (10%-50%).
Flashing Red = critical power(<10%), will stay flashlight red when it is on.
Low Voltage Protection: If the battery’s voltage is lower than 2.8V, DL02 turns off automatically to avoid battery damage by over discharge.
Contact
Please contact us for a refund or replacement, if your flashlight has a problem within the warranty period.