Specificaition:
-Use: Passenger Car, Motorcycle, Car, Truck
- Battery capacity: 10000mah
-Battery Type: High-ratio Polymer Lithium Batteries
- Size:160*80*30mm
- Weight:340g
- USB Output:5V/2A
- Jump Start: 12V
- Input:15V/1A / 2A
- Full charging time:about 3 hours
- Starting current:400A
- Peak current:1000A
- Operating temperature: -30~65℃
-Suitable for: 6.0L Gas
-Jump Starter 12V: 3.0L Diesel
-Charging Output: USB-C
Operate method:
1. Before start the car, please make sure the host minimum
2pcs LED indicated light on, then connect the blue plug fully seated into the host socket, and confirm the cable indicator is off
2. Connect the red clip to the positive (+) battery terminal, black clip to the negative (-) battery terminal
3. Start the vehicle
4. When the vehicles starts, please make sure pull up the clamp cable from power bank and then from the car battery terminals. please do not connect the red and black clip to the vehicle battery terminals within 30 second.
Emergency start step:
1. Red clamp connect "+" black clamp connect "_"
2. The plug connect the jump starter
3. Start the vehicle
4. Remove the plug from the jump starter
5. Remove the clamps from the battery
Package included:(as the picture shows)
- 1x Oedinary Jumper Cable
- 1x Charging Cable
- 1x A20 Jump Starter
- 1x Box
- 1x User Manual