Lift is a highly concentrated pre-wash foaming agent that dissolves and lifts away a large amount of dirt and grime in a completely touchless manner, prior to the application of vehicle shampoo.
Lifts uses 12pH alkyl cleaning ingredients, which are strong yet gentle and suitable for use with all pressure foam lance washers. Applied at a typical 1:10 dilution ratio (or others depending on the desired foam viscosity), Lift will dwell on surfaces typically for 5 minutes. Lift is formulated specifically to offer maximum wetting and rinses easily as well. It is not a superficial high foaming product but has been designed as a true active surface agent.
During the panel dwell period, Lift's bubbles will burst and move, encouraging soaking and cleansing agents to start working. They lift road grime, by binding with our proprietary blend of surfactants.
How to use as a Pre-Wash Solution:
1. Use only on cool surfaces. Do not use in direct sun. DO NOT allow shampoo to dry on surface.
2. Dilute Lift with water (we recommend 1:10). You can use leaner ratios for a more flowing mixture or a richer ratio for a denser foam.
3. Allow the product to remain on the surface for a minute or as long as possible without allowing too dry.
4. Power rinse off. This completes your Lift Pre-Wash.
5. Wash with CarPro Reset.
How to use as Single Wash Solution:
1. Use only on cool surfaces. Do not use in direct sun. DO NOT allow shampoo to dry on the surface.
2. Pre-rinse vehicle with free flowing water to remove loose debris.
3. Dilute Lift with water (we recommend 1:10). You can use leaner ratios for a more flowing mixture or a richer ratio for a denser foam.
4. Allow the product to remain on the surface for a minute and then wash from the top down using CarPro Hand Wash Mitt/ Wool Wash Mitt.
5. Its critical to rinse your mitt or sponge periodically in a second bucket filled with clear water or with a hose.
6. After washing, rinse the vehicle thoroughly with free flowing water to remove shampoo residues, and dry with a CarPro Dhydrate Towel.
Precautions:
1. Test the product on an inconspicuous area before use.
2. Do not spray onto hot surfaces or in direct sun.
3. Do not let the product dry, even when diluted.
4. Store in a dry cool place.
5. Keep out of reach of children.