MASTERPAV AS28 Gloss Acrylic Sealer
(formerly known as SG56)
MASTERPAV AS28 Gloss Acrylic Sealer is a solvent-based clear finish that creates a wet look seal for the concrete flooring. It is highly advised to apply MASTERPAV AS28 by roller for an even finishing. It dries fast and imparts onto the concrete surfaces a gloss finish and good protection from surface staining. It could be coated on the interior and exterior concrete imprint surfaces, pebble floors, slate, and other concrete flooring materials.
It is important to ensure that the surface receiving the MASTERPAV AS28 is dry, clean, and free from dust prior to application to ensure maximum adhesion.
Benefits:
Gloss
Water resistant
UV stable
Easy to clean
Colour enhancing
Product Information
Packaging:1 liter, 5 liter, 20 liter
Consumption:4 - 5 sq mtr per liter
Shelf life:12 months if kept unopened and sealed
Instruction for Use
SURFACE PREPARATION:
Ensure the substrate is clean and dry. Remove any grease by detergent or alkaline etch. Loosely bound particles can be removed by air blower. Any algae, mildew or moss should be removed.
MIXING:
Stir well before using.
APPLICATION:
Apply using roller or brush. Allow sealer to dry for 24 hours for light traffic and at least 72 hours for heavy vehicle. For maximum protection, two coats of MASTERPAV AS28 can be applied, wait approximately 1 – 2 hours between coats.
NOTE:
MASTERPAV AS28 is not recommended for substrates that contain high moisture. Spot test can be conducted to determine if the surface which is ready to receive AS28.