This Front Horizontal Plate Positioning Perforation Mount Mould For H7 H4 H11 H1 D2 9005 9006 Halogen Headlight in retrofitting projector lenses of front headlamp. It comes with a level meter, perforated in front of the headlights, and the operation process is more accurate. It helps to adjust the light beam of the projector lens and save a lot of work.
------------------------------------------
Important: The angle of the horizontal line must be adjusted on the car!
------------------------------------------
Installation method:
1. Put on the round plate
2. Insert it into your car headlight reflector
3. Put the corresponding plate（for example if your car is H4 then put the H4 plate）
4. Fasten the screws
5. Put the assemble back to your car and adjust the angel（Very important step!）
6. Drill the mounting holes
7. Cut the reflector holes bigger for insert the HELLA projector lens
8. Inatall the Koito Q5/Hella G3/Hella G5 projector lens on
------------------------------------------
Item Description:
1. The mounting plate is made of metal,with impact resistant,high precision, and the socket moulds are made of plastic.
2. Each set of mounting moulds includes 7 models: H1/H4/H7/H11/9005(HB3)/9006(HB4)/D2S/R.
3. Our mounting plate is made of strong metal and can be used for: Koito Q5/Hella G3/Hella G5 projector lens etc.
if you need other models,please contact us.
4. We also provide other headlight retrofit tools and related accessories etc. you can contact our customer service for more information.
5. Important Notes: This mounting plate will not suitable for 2.5'' projector lens!
Tip: If you want other mounting plate and moulds, please contact us. Thank you!
