*Caution: Connect the battery first. and then connect the solar panel The sequence cannot be reversed.
Can be paired with solar panels (can be connected in series)
MPPT 60A:
Can be paired with solar panels 50--10800W (can be connected in series)
Can contact with 12--48V battery.
MPPT 100A:
Can be paired with solar panels 50--18000W (can be connected in series)
Can contact with 12--48V battery.
Description of charging protection
*Note: Please connect the battery to the controller first, and then the photovoltaic panel to ensure that the battery voltage is higher than (12V battery is higher than 10V; 24V battery is higher than 20V; 36V battery is higher than 30V; 48V battery is higher than 40V), otherwise it will cause voltage Identification error.
*Clock setting instructions: When the battery is connected, press "▲" "▼" to set the clock table, short press "■" to save.
*Charging voltage setting instructions: After connecting the battery, after setting the clock and saving, long press "▲" for 3-5 seconds, the screen displays L**V as the floating charge voltage, which can be adjusted by pressing "▼"; short press again "▲"H**V is to increase the charging voltage, which can be adjusted by pressing "▼"; shortly press "▲" again. F**V is the low-voltage cut-off voltage of the DC load, which can be adjusted by pressing "▼"; after setting Long press "▲" for 3-5 seconds to save and exit.
Precautions
1. Please do not throw this product into fire to prevent permanent damage to the product;
2. Please do not throw this product into water to prevent permanent damage to the product;
3. Please do not use this product in a humid and high temperature environment;
4. Please do not try to disassemble this product to prevent damage;
5. Please do not short-circuit the output side directly to avoid danger.
