*******READY STOCK IN MALAYSIA, MINIMUM SHIP IN 24 HOUR*******
Product Name: Integrated Emergency Starting and Inflating Device for Automobiles
Storage Temperature: -40°C to +85°C
Product Size: 200x120x50mm
Product Weight: Approximately 1000g
Battery Type: Lithium Polymer Battery
Voltage: 12v
Charging Interface: Type-C
USB Output: DC5V/2A
Usage Steps
1. Connect the positive and negative terminals of the battery: The red clamp connects to the positive (+) and the black clamp connects to the negative (-).
2. Connect the clamps to the power source: Insert the blue DO head of the clamp into the power source, and then start the vehicle.
3. Start the vehicle: Complete the vehicle starting within 30 seconds.
4. Remove the clamps: After starting the vehicle, remove the battery clamps.
Precautions for Emergency Power Supply
1. When using this product to emergency start the vehicle, it is necessary to strictly follow the operation specifications. If continuous starting of the vehicle is required, an interval of at least 30 seconds should be maintained.
2. When using this product for emergency starting, attention should be paid to traffic safety.
3. During long-term storage, it is recommended to maintain a certain amount of power for the product and charge it at least once every three months.
4. During use or charging, if the device heats up slightly, it is a normal phenomenon and not a malfunction.
5. When children use the power supply, they must be guided by parents and operate strictly in accordance with the content of the manual to ensure its correct use.