Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

Valve grinding tool Electric valve grinding machine Valve maintenance Grinding sand grinding Valve valve repair
No Rating Yet
0 Dijual

/ Per Produk

Penghantaran

Penghantaran Dari
Kuala Lumpur
Anggaran Penghantaran
Nov 22, 2024 - Nov 29, 2024

Warna

Sila pilih variasi produk terlebih dahulu

Kuantiti

487 Unit lagi
Jumlah
RM 306.96
Gambaran Kedai
Gourmet Elf
17 hours ago
Produk 37354
Pengikut 13
Penilaian 4.8
Sertai 3 Months Ago
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Kitchen & Dining  >  Bakeware & Baking tools  >  Measuring Tools
Brand
: NoBrand
Model
: Not Specified
SKU
: 12913001216
Dimension (Length x Width x Height)
: 10.00 x 15.00 x 20.00
Weight(kg)
: 0.6
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Kuala Lumpur
Deskripsi Produk
How to use: After valve reaming for general valve seats, the valve should be ground.

Connect the valve grinder to the air source / power supply, use the rubber tip of the grinder to suck the valve being ground, and then press the grinder gently, the grinder can automatically rotate and flap the valve to complete the grinding task.

Performance and specifications

Grinding valve weight: 3 kg

Grinding valve maximum diameter: 130 mm

Rated voltage: 220v

Rated current: 0.62A

Motor rated power: 150W

Working speed: first gear 200 / min

: Second gear 300 / min

Number of impacts: 400 / min

: Second gear 600 / min

Working stroke: 0-10mm

Motor temperature: 60 ° C

Set weight: red (2580 g)

1: Select the adsorber according to the size of the grinding valve and put it on. Align the grinding machine absorber with the grinding valve, select the magnetic operation position, and then turn on the power switch (the order is reversed when stopping). The height of the valve is as required. For adjustment, loosen the fastening screws before adjusting and tightening.

2: The grinding time of each valve is related to the quality of the valve. Generally, the grinding is good for 2-3 minutes. It is necessary to observe the grinding surface at any time to prevent excessive grinding. When the valve is not perpendicular to the adsorption surface of the magnetic seat, or it is not vertical during use, the support rod nut should be loosened to adjust the grinding angle so that it is perpendicular to the grinding valve and lock the nut. Otherwise it will affect the grinding quality and reduce the service life of the grinder.

Repair and maintenance:

1: The machine will have a certain temperature during use, but generally does not exceed 60 ° C. After working for a period of time, the machine must be disassembled, washed and refueled. The gear chamber is lithium-based or sodium-based lubricating grease. Generally, refueling is performed every 100 hours, and a small amount of oil is added to ensure the lubrication of the jumper.

2: Always observe the wear of the motor brushes and replace the brushes that are too short in time. The brushes that have been replaced should move freely in the brush holder. After the handheld motor runs flexibly, turn on the power for 15 minutes to allow the brushes to contact the steering gear. good,

3: The machine should be stored in a dry and ventilated place to prevent moisture.
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.