Product Features:
1. 【Two Scan Modes Selectable】 Normal Mode/ Anti-jamming Mode.Locate the target network cable among many network cables.
2. 【Cable Continuity Testing】 Used to detect line sequence, short circuit, open circuit, crossover, etc. of network cables, and display the results in the form of line sequence lights.
3. Can test the power supply mode of POE switch.
4. 【Crystal head crimp test function】NF-808 can test network cables or telephone lines.
5. 【Connection function】 Insert the crystal head with the alligator clip into the RJ11, and use the two clips of the alligator clip to clamp the two ends to be measured. If the line is connected, the continuity indicator light will light up. The brightness of the indicator light will change depending on the impedance on the line. The brighter the light, the smaller the impedance, and the dimmer the light, the greater the impedance.
6. 【NCV Function】 If there is AC power greater than 40V, the receiver will make a "beep" sound.
7. Low battery prompt function: When the battery power is low, the receiver power indicator light flashes to prompt, and the transmitter power indicator
8. Lighting Function, convenient to work in dark environment.
Product Description:
Brand: NOYAFA
Product Name: Network Cable Tester
Type: NF-808
Dimension(LxWxD): Maintester: 133x69x32mm; Receiver: 198x50x32mm
Cable Type: CAT5, CAT6
Interface withstand voltage: 60V
Headphone Function:Yes
Charging method: Type-C charging, 3.7V 1400mAh polymer battery
Notes:
-
The RJ45 interface of this device has a voltage resistance of 60V. Please do not connect a network cable that exceeds the voltage range to the device to avoid burning the device.