Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

TUBA TH102AG 1.0mm HVLP HIGH PERFORMANCE SPRAY GUN [SPRAY HEADLIGHT & SPRAY CAR BODY]
No Rating Yet
0 Dijual
/ Per Produk

Penghantaran

Penghantaran Dari
Johor
Anggaran Penghantaran
Sep 29, 2024 - Oct 06, 2024

Warna

Sila pilih variasi produk terlebih dahulu

Kuantiti

3 Unit lagi
Jumlah
RM 278
Gambaran Kedai
ANTIRAIN CAR CARE SUPPLIES
1 minutes ago
Produk 433
Pengikut 5
Penilaian 5
Sertai Within a Year
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Automotive & Motorbike  >  Auto Care  >  Others
Brand
: NoBrand
Model
: 1090
SKU
: 1090
Dimension (Length x Width x Height)
: 21.00 x 18.00 x 28.00
Weight(kg)
: 2.1168
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Johor
Deskripsi Produk

Specifications

Air inlet: 1/4"

Fluid inlet: M14*1mm

Container: 300ml

Air Consumption: 200L/Min

Working pressure: 22psi


How to connect

CAUTION

- Use clean air filtered through air dryer and air filter.

If not, dirty air can cause painting failure.

- When you use this gun for the first time after purchasing, adjust fluid needle packing set.

Slowly tighten fluid packing seat and loosen a bit when fluid needle set does not return smoothly, and adjust so that fluid needle set smoothly moves.

- If you use this gun for the first time after pruchasing, clean fluid passages spraying thinner and remove rust preventive oil.

If not, remaining preventive oil can cause painting failure such as fish eyes.

- Firmly fix hose or container to spray gun.

If not, disconnection of hose and drop of container can cause bodily injury.


1. Connect an air hose to air nipple tightly.

2. Connect a fluid hose or a container to fluid nipple tightly.

3. Flush the gun fluid passage with a compatible solvent.

4. Pour paint into container, test spray and dajust fluid output as well as pattern width.


How to operate

1. Suggested air pressure of 1. 5-2 bar (21-30psi).

2. Recommended paint viscosity differs according to paint property and painting conditions. 18±2 sec. / Iwata cup#2 is recommendable.

3. Keep fluid output as small as possible to the extent that the job will not be hindered. It will lead to better finishing with the atomization.

4. Set the spray distance from the gun to the work piece within the range of 100-150mm (3.9-5.9in).

5. The gun should be held so that it is perpendicular to the surface of the work piece at all times. Then the gun should move in a straight and horizontal line. Arcing the gun cause uneven painting.

Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.