Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

šŸ”„100% ORIGINALšŸ”„ SELLEYS HIGH-TEMP RTV GREY SILICONE GASKET MAKER GRAY MOTOR GASKET GEARBOX MAKER OIL PUMP
No Rating Yet
0 Dijual
/ Per Produk

Penghantaran

Penghantaran Dari
Perak
Anggaran Penghantaran
Nov 21, 2024 - Nov 28, 2024

Warna

Sila pilih variasi produk terlebih dahulu

Kuantiti

19 Unit lagi
Jumlah
RM 11.5
Gambaran Kedai
HA HARDWARE
12 minutes ago
Produk 1245
Pengikut 2
Penilaian 5
Sertai Within a Year
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Automotive & Motorbike  >  Auto Care  >  Others
Brand
: NO BRAND
Model
: Not Specified
SKU
: HAH0000000985
Dimension (Length x Width x Height)
: 20.00 x 4.00 x 11.00
Weight(kg)
: 0.176
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Perak
Deskripsi Produk

šŸ”„100% ORIGINALšŸ”„ SELLEYS HIGH-TEMP RTV GREY SILICONE GASKET MAKER GRAY MOTOR GASKET GEARBOX MAKER OIL PUMP (M/R)


IDEAL FOR :

-CRANKSHAFT GASKET

-OIL PUMPS

-GEARBOXES AND PUMPS

-WATER PUMPS


FEATURES :

-FORMS GASKETS INSTANTLY FROM THE TUBE – ANY SIZE, ANY SHAPE

-INSTANTS GASKET CURES TO A TOUGH SILICONE

-RUBBER WHICH OUTPERFORMS AND REPLACES CONVENTIONAL PAPER, CORK OR RUBBER GASKETS

-INSTANT GASKET FLOWS INTO EVERY SPACE OR UNEVENNESS BETWEEN SURFACES PERFECTLY FOR A TOUGH AND HIGH PRESSURE SEAL

-RESIST HIGH TEMPERATURES

-RESIST AGEING, WATER, OIL, GREASE AND VIBRATION

-LOW ODOUR


DIRECTION :

1. REMOVE OLD GASKET MATERIAL FROM MATING SURFACES AND CLEAN WITH TURPENTINE OR PETROL. IF ADHESION OF THE GASKETING IS NOT REQUIRED, WIPE MATING SURFACES WITH AN OILY CLOTH.

2. PIERCE BLIND SEAL IN TUBE, FIT NOZZLE AND CUT TO REQUIRED SIZE; EG. 3MM FOR STAMPED PARTS AND 1.5MM FOR CAST PARTS. SQUEEZE A BEAD OF SEALANT ONTO ONE OF THE SURFACES TO BE JOINED, AROUND THE PERIMETER OF THE PART AND AROUND BOLT HOLES.

3.JOIN THE PARTS TOGETHER WITHIN 10 MINUTES AND BOLT DOWN TO THE DESIRED TORGUE. IF THICKER GASKET IS REQUIRED, ASSEMBLE BUT DO NOT TIGHTEN BOLTS FOR 24 HOURS. MATERIAL CURES IN 48 HOURS. (WHEN DISASSEMBLY IS REQUIRED, PRY THE TWO FLANGES APART AND REMOVE THE OLD SEALANT BEFORE REASSEMBLY.)

4. AFTER USE REMOVE NOZZLE AND REPLACE CAP. ALLOW SEALANT TO CURE IN NOZZLE AND REMOVE BEFORE NEXT USE.


HANDY TIPS :

NOT RECOMMENDED WHERE TEMPERATURES EXCEED 343ĖšC/650ĖšF (SUCH AS EXHAUST MANIFOLDS) OR FOR CONTACT WITH GASOLINE OR DISTILLATE. WHEN ELIMINATING CORK GASKETS, ENSURE THAT ADEQUATE CLEARANCE REMAINS FOR MECHANICAL PARTS, EG. VALVE ROCKER COVERS (IN THESE CASES DO NOT FULLY TIGHTEN UNTIL SEALANT HAS CURED).


SAFETY TIPS :

ON CONTACT, UNCURED SEALANT CAN IRRITATE SKIN AND EYES. IF IN EYES, WASH OUT IMMEDIATELY WITH WATER. PRODUCT RELEASES ACETIC ACID WHILE CURING. KEEP OUT OF REACH OF CHILDREN.

Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • Ā©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.