Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

Tempered Glass Vivo X100 V29 V27 X90 Pro V25 Pro X80 Pro Plus X70 X60 X50 Pro UV Glue Curved with UV LED Light
No Rating Yet
0 Dijual

/ Per Produk

Penghantaran

Penghantaran Dari
Selangor
Anggaran Penghantaran
Apr 27, 2024 - May 04, 2024

Warna

Colors

Size

Sila pilih variasi produk terlebih dahulu

Kuantiti

100 Unit lagi
Jumlah
RM 46.06
Gambaran Kedai
marui
3 minutes ago
Produk 28484
Pengikut 5
Penilaian 5
Sertai Within a Month
Kadar Pembatalan 4.3%
Spesifikasi Produk
Category
: Electronics Accessories  >  Mobile Accessories  >  Screen Protectors
Brand
: NoBrand
Model
: Not Specified
SKU
: 172518921412
Dimension (Length x Width x Height)
: 10.00 x 15.00 x 20.00
Weight(kg)
: 0.6
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Selangor
Deskripsi Produk
How to Install : https://youtube.com/shorts/lqcXRyXF0nI
How to fix bubble : https://youtube.com/shorts/Ak5XaushWxE

1. Use a foil cleaning kit to wipe the phone to be clean.
2 .Place the sticker over the hole in the handset. Stick the key hole with a label.
3 .Place custom glue drops on flat, clean and dust-free glass screens. Use each glue to use. It is recommended that the glue be poured completely. The excess glue can be wiped clean before turning on the lights. The glue can only be a mass and cannot be separated. Drops on the screen.
4 .The glue that drops on the screen can't have air bubbles, if there is air bubble, use the needle to pierce the air bubble to let go air.
5 .Remove the release film from the protective film and place the glass on the screen so that the glass contacts the glue and gently translate the glass to a suitable position. Do not lift the glass and allow the glass to separate from the glue (very important).
6 .Wait for about 30 seconds to let the glue slowly spread and level.
7. There is glue overflow, wipe off with a clean cloth. After checking the retention criteria for the mobile phone's tempered film, the lamp was turned back and forth three times around the edge of the phone, and after 3 seconds of initial curing (not in the middle), the edge glue was wiped again until the glue overflowed. (Prevent white edges or long bubbles on edges)
8. Wait for the exhaust to complete, after the glue overflows cleanly, after the positioning standard of the tempered film is satisfied, turn on the light. Otherwise scrapped material.
9. Irradiate the mobile phone under UV light and need to illuminate twice for about 60 seconds to reach the fully-cured position.
10. is not allows for use of the On-screen fingerprint sensor.

!!! Note !!!!
Jika anda tidak tahu cara memasang, sila hubungi kami. ( Jika ia rosak selepas pemasangan , tidak boleh buat return atau refund )
If you do not know how to install, please contact us. (It is not possible to return and refund if it is after install or break yourself)

#temperedglass #curvedtemperedglass #vivo #vivox50pro #x50pro #uvglue #fulltemperedglass #uv #x60pro #vivox60pro #matte #x70pro #x70proplus #x80 #X80pro #x80proplus #v25pro #x90 #x90pro #x90proplus #v27 #x100 #x100pro
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.