Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

JOTUN Jotaplast Max Interior Emulsion Paint 7 Litre (Cat Air Dalaman Dinding)
No Rating Yet
0 Dijual

/ Per Produk

Penghantaran

Penghantaran Dari
Selangor
Anggaran Penghantaran
May 08, 2024 - May 15, 2024

Warna

Color

Sila pilih variasi produk terlebih dahulu

Kuantiti

100 Unit lagi
Jumlah
RM 71.37
Gambaran Kedai
Beauty and Makeup Shop
23 minutes ago
Produk 48068
Pengikut 75
Penilaian 4.5
Sertai 6 Months Ago
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Automotive & Motorbike  >  Auto Care  >  Paints & Primers
Brand
: Jotun
Model
: Not Specified
SKU
: 004739103459
Dimension (Length x Width x Height)
: 10.00 x 15.00 x 20.00
Weight(kg)
: 0.6
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Selangor
Deskripsi Produk
📌Maximum 1 tin per order due to courier limitation📌

Product detail of JOTUN Jotaplast Max Interior Emulsion Paint 7 Litre

Jotaplast Max is a quality interior acrylic emulsion paint for your walls and ceilings. It is easy to apply, provides good hiding with consistent results and reliability. Jotaplast Max is 100% free from harmful chemicals such as APEO, formaldehyde and heavy metals. Available in matt finish.

*This product is Singapore Green Label certified.

Features and benefits
• Good Hiding - Provides good hiding power to conceal wall imperfections.
• Easy to Apply - Effortless application with smooth finish.
• Wide Coverage - Covers wider surface area with less paint.
• Formulated without Harmful Chemicals - Free from harmful chemicals such as APEO, formaldehyde, heavy
metals and has low volatile organic compound (VOC).

Recommended use
• For interior application, suitable for new buildings and repainting.
Substrate
• On concrete, masonry, plaster, brick work and soft board surfaces.

PACK SIZE
- 7 litres

COLOR RANGE
- 42 Colours Selection, as per colour card

Number of Coats (recommend) : 2

Surface preparation
The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc. All traces of form release
agents/curing agents must be removed. A light sanding with suitable abrasive material is recommended before
application. Any resulting dust/loose particles must be removed.

APPLICATION DATA
Remarks : Handle with care. Stir well before use.
Application equipment / methods : By brush, roller, airless spray or conventional spray.
Guiding data for airless spray :
Nozzle tip : 0.021–0.027"
Spray angle degrees : 65–80°
Pressure at nozzle : 140 - 190 kg/cm² (2100 psi)
Spreading rate per coat : Theoretical 11 m²/l - 8 m²/l
Thinner : Water
Dilution : The paint is ready to use after proper stirring. If thinning is required, water may be added up to a maximum of
10%.
Conditions during application : The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper
drying.
Drying times (estimate) :
Surface (touch) dry : 0.5 h - 2 h
Hard dry : 4 h - 8 h
Dry to over coat, minimum : 1 h - 4 h

Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well
ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle
with care.
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.